Solved

allow outlook web access to 2003 SBS server

Posted on 2007-03-27
4
199 Views
Last Modified: 2010-04-20
Trying to configure a Cisco router 506E using the PDM to allow outside access to outlook on 2003 SBS server.  I am currently using PAT does this have to be changed to NAT?  And can anyone assist in the configuration.
I tried to add a outside permit with https to the inside interface but it keeps asking for a static route.  I am using dynamic address through my adsl.

Kent
0
Comment
Question by:ktredenick
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
4 Comments
 
LVL 7

Accepted Solution

by:
Mikealcl earned 500 total points
ID: 18803660
You need both the access-list permission and a static route

something like

access-list outside_in permit tpc any host xxx.xxx.xxx.xxx eq https

and something like

static (inside,outside) tcp xxx.xxx.xxx.xxx https yyy.yyy.yyy.yyy https netmask 255.255.255.255 0 0

yyy.yyy.yyy.yyy being the internal IP address
xxx.xxx.xxx.xxx being the external IP address webmail is accessed from.

I do all this over SSH/telnet to my device.  Not great with the web interface.

0
 

Author Comment

by:ktredenick
ID: 18804600
Will try that tomorrow, the webinterface allows me to add lines into the configuration.  I will let you know how I make out.

Thanks

Kent
0

Featured Post

Office 365 Training for IT Pros

Learn how to provision tenants, synchronize on-premise Active Directory, implement Single Sign-On, customize Office deployment, and protect your organization with eDiscovery and DLP policies.  Only from Platform Scholar.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to resolve IMCEAEX NDRs in Exchange or Exchange Online related to invalid X500 addresses.
In-place Upgrading Dirsync to Azure AD Connect
In this video we show how to create an Address List in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Organization >> Ad…
To show how to create a transport rule in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Rules tab.:  To cr…

718 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question