Solved

cisco ASA 5510

Posted on 2007-03-28
2
423 Views
Last Modified: 2012-05-05
what ever i do,I cannot save the conf because i keep getting this error.

% Invalid input detected at '^' marker
0
Comment
Question by:ants-servertech
2 Comments
 
LVL 28

Assisted Solution

by:batry_boy
batry_boy earned 20 total points
ID: 18816595
You need to be in "enable" mode to save the config.  Make sure the command line prompt looks like this:

hostname#

with a pound sign (#) at the end.  Then issue the command:

write mem

This should save the running configuration.
0
 

Accepted Solution

by:
ants-servertech earned 0 total points
ID: 18822208
This Error was due of wrong user was beeing used,  it was an user with privalege level 0.. so it did not have the right do do any changes. and he tried to configure through the GUI not the CLI.


well problem solved  =)
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

OpenVPN is a great open source VPN server that is capable of providing quick and easy VPN access to your network on the cheap.  By default the software is configured to allow open access to your network.  But what if you want to restrict users to on…
I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now