Solved

Loading raid driver for reovery console...

Posted on 2007-03-29
4
214 Views
Last Modified: 2013-11-14
Ok folks,
   I have a system with a raid 5 set up on 3 hard drives....windows xp media center,  sata raid controller on mother board...
Here is the issue...
the system locks on boot... seems to be a corrupted registry.... I want to recover the registry (I know how to do this) BUT, when I run the xp-disks repair console i cant see the drive(s)... I know I need to load the raid driver however I don't know which one to run or how to find it.... I believe it is running off the mother board... it is a biostar tfource 590 sli.

What I need to know is where do I find the driver for this and what is the procedure for loading it...???

thanks for the help
0
Comment
Question by:hawgpig
  • 3
4 Comments
 
LVL 63

Accepted Solution

by:
SysExpert earned 500 total points
ID: 18819010
1) The driver should be on the motherboard CD, or available for download from the Biostar site.

I hope this helps !
0
 
LVL 63

Expert Comment

by:SysExpert
ID: 18819101
0
 
LVL 63

Expert Comment

by:SysExpert
ID: 18819108
0
 
LVL 4

Author Comment

by:hawgpig
ID: 18820967
thanks for the help....I thought it wasn't on the CD... It was it was inside an archived file....
That worked the system is back on it's feet...

Thanks again
<HawgPig~
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Ever notice how you can't use a new drive in Windows without having Windows assigning a Disk Signature?  Ever have a signature collision problem (especially with Virtual Machines?)  This article is intended to help you understand what's going on and…
Create your own, high-performance VM backup appliance by installing NAKIVO Backup & Replication directly onto a Synology NAS!
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This Micro Tutorial will teach you how to reformat your flash drive. Sometimes your flash drive may have issues carrying files so this will completely restore it to manufacturing settings. Make sure to backup all files before reformatting. This w…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question