Solved

PIX routing problem.

Posted on 2007-04-02
3
230 Views
Last Modified: 2010-04-09
Hello,

I've redistributed EIGRP from 3750 to OSPF on PIX - works fine. However, as soon as I start to lock-down the PIX with acls 'from-LAN-outbound' (3750 is on LAN) the routing seems to fail. Is this because I am blocking the 3750 from sending advertisements to the PIX and if so what do I need to permit in the acls?

Thanks.
0
Comment
Question by:Ciderspine
  • 2
3 Comments
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 18836540
You need to permit ospf to the interface if you are putting acls on the inside interface.
example:
access-list inside_out permit ospf host <3750 IP> interface inside
0
 

Author Comment

by:Ciderspine
ID: 18838232
Ah, the omniscient lrmoore once again.  Thank you, Sir.

Is it Lrmoore or Irmoore?
0
 
LVL 79

Expert Comment

by:lrmoore
ID: 18838783
Thanks! It's LRMoore
This font makes it hard to tell difference between L and I
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Suggested Solutions

I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
Polish reports in Access so they look terrific. Take yourself to another level. Equations, Back Color, Alternate Back Color. Write easy VBA Code. Tighten space to use less pages. Launch report from a menu, considering criteria only when it is filled…
You have products, that come in variants and want to set different prices for them? Watch this micro tutorial that describes how to configure prices for Magento super attributes. Assigning simple products to configurable: We assigned simple products…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now