Solved

Cisco 2621 Hardware Problem

Posted on 2007-04-03
3
1,142 Views
Last Modified: 2011-09-20
hi huys

here ia a problem . i have a Router at my client site Cisco 2621 with 2 FE .
the Router came to me that its Ethernet ports are not working ..when i accessed the Router that was in the Rommon Mode . i just upgraded its IOS and then rebboted it .
Here is Stunning thing

i can see the any FE port

here is a complete info anybody needs

Router>en
Router#cs  sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.2(24), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 28-Apr-04 15:30 by kellmill
Image text-base: 0x8000808C, data-base: 0x812D111C

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

Router uptime is 44 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s-mz.122-24.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

 --More--         A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco 2621XM (MPC860P) processor (revision 0x100) with 125952K/5120K bytes of memory.
Processor board ID JHY0729K17E (1796112698)
M860 processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
4 Voice FXO interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102



Router#sh diag
Slot 0:
      C2621XM 2FE Mainboard Port adapter, 2 ports
      Port adapter is analyzed
      Port adapter insertion time unknown
      EEPROM contents at hardware discovery:
      Hardware Revision        : 1.0
      PCB Serial Number        : JHY0729K17E (1796112698)
      Part Number              : 73-7754-02
      RMA History              : 00
      RMA Number               : 0-0-0-0
      Board Revision           : A0
      Deviation Number         : 0-0
      EEPROM format version 4
      EEPROM contents (hex):
        0x00: 04 FF 40 03 6D 41 01 00 C1 18 4A 48 59 30 37 32
        0x10: 39 4B 31 37 45 20 28 31 37 39 36 31 31 32 36 39
        0x20: 38 29 82 49 1E 4A 02 04 00 81 00 00 00 00 42 41
        0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
        0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
        0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
        0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
        0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

 --More--         Slot 1:
      4 PORT Voice PM for C2600 Port adapter
      Port adapter is analyzed
      Port adapter insertion time unknown
      EEPROM contents at hardware discovery:
      Hardware revision 1.1               Board revision H0
      Serial number     21978867        Part number    800-02491-02
      FRU Part Number:  NM-2V=

      Test history      0x0               RMA number     00-00-00
      EEPROM format version 1
      EEPROM contents (hex):
        0x20: 01 65 01 01 01 4F 5E F3 50 09 BB 02 00 00 00 00
        0x30: 88 00 00 00 00 12 27 17 FF FF FF FF FF FF FF FF

      VIC Slot 0:
      FXO Voice daughter card (2 port)
      Hardware revision 1.1               Board revision J0
      Serial number     27252207        Part number    800-02495-01
      Test history      0x0               RMA number     00-00-00
      Connector type    Wan Module
      EEPROM format version 1
      EEPROM contents (hex):
 --More--                 0x20: 01 0D 01 01 01 9F D5 EF 50 09 BF 01 00 00 00 00
        0x30: 98 59 52 00 01 11 07 01 FF FF FF FF FF FF FF FF

      VIC Slot 1:
      FXO Voice daughter card (2 port)
      Hardware revision 1.1               Board revision J0
      Serial number     27252315        Part number    800-02495-01
      Test history      0x0               RMA number     00-00-00
      Connector type    Wan Module
      EEPROM format version 1
      EEPROM contents (hex):
        0x20: 01 0D 01 01 01 9F D6 5B 50 09 BF 01 00 00 00 00
        0x30: 98 59 52 00 01 11 07 01 FF FF FF FF FF FF FF FF




Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#inter fa
Router(config)#inter fastEthernet 0/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#
*Mar  1 00:45:10.259: %AMDP2_FE-1-INITFAIL:  CSR0=0x0000

This is the main Error

*Mar  1 00:45:10.259: %AMDP2_FE-1-INITFAIL:  CSR0=0x0000

what can be the Reason for that

and the last

Router#sh flash:

System flash directory:
File  Length   Name/status
  1   11320704  c2600-ik9o3s-mz.122-24.bin
[11320768 bytes used, 22233660 available, 33554428 total]
32768K bytes of processor board System flash (Read/Write)


me Waiting

Regards
asad
0
Comment
Question by:annasad
  • 2
3 Comments
 
LVL 3

Accepted Solution

by:
cyoncon earned 500 total points
Comment Utility
Hey Asad,
According to the output interpreter

%AMDP2_FE-1-INITFAIL (x0): [chars], Init failed, CSR[dec]=[hex]

Explanation: The software has failed to initialize or restart an Ethernet or
Fast Ethernet interface.

Where the interfaces working fine sometime before you intalled the IOS?
I think it maybe a IOS bug, or the image installed is not for that router model, I'll sugest upgrading, or downgrading to another image.
0
 
LVL 1

Author Comment

by:annasad
Comment Utility
well ...you see that IOS is not particular for that Router ....may be you are right ..but the strange thing is that it can see the FXO/FXS Module in it ...Then why not a builtin FastEthernet ports . and any way are you sure that its a software problem ....rather than the hardwhare ???
i dont know what they did ...but when it came that was in Roomon mode ??? i tell you that i loaded the 2620 XM  IOS on 2621XM ... do you think so it should work ???

Regards
ASAD
0
 
LVL 1

Author Comment

by:annasad
Comment Utility
hi

no answer from anybody
when i do tftpdnld giving all the parameters
it start downloading the IOS and once it says file received ...it says now its ereasing the Flash and in the last it says CAN NOT ERASE FLASH AND ALL OPERATION IS ABORTED .. CAN ANY BODY GIVE ME A TIP THAT IF MY FLASH IS CURRUPT OR THE IOS IS CURRUPT OR WHATEVER ???

HOE TO REACH THE SOLUTION

rEGARDS
ASAD
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Shadow IT is coming out of the shadows as more businesses are choosing cloud-based applications. It is now a multi-cloud world for most organizations. Simultaneously, most businesses have yet to consolidate with one cloud provider or define an offic…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now