Solved

installing RIS server on Cisco 6513 VLAN's

Posted on 2007-04-04
5
594 Views
Last Modified: 2012-06-21
we have a Cisco 6513 Vlan'd

we are installing a win3003 RIS server, how do i configure the cisco 6513 to pass this to the RIS server?

from reading Microsofts article, you need to configure the routers ip helper table to contain the Ip address of the RIS Server
0
Comment
Question by:jagdhillon
  • 3
  • 2
5 Comments
 
LVL 50

Expert Comment

by:Don Johnston
ID: 18849708
On the layer 3 interfaces that will be receiving the traffic going to the RIS server, add the command:

ip helper-address x.x.x.x (ip address of RIS Server)

0
 

Author Comment

by:jagdhillon
ID: 18850153
what if i've already got a ip helper-address x.x.x.x configured for my DHCP server can I add a second IP helper for RIS?
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 18850220
If the DHCP server and RIS Server are on the same network, use the outbound interface instead of the IP address as the destination for the IP helper command.
0
 

Author Comment

by:jagdhillon
ID: 18850278
I have a DHCP  server on 10.2.8.17 /16
and the RIS is on 10.2.8.100 /16

this is the current configuration, basically i want all users from all VLAN's to access the RIS server

however we need tobe able
interface Vlan2
 ip address 10.2.200.1 255.255.0.0
!
interface Vlan81
 description ### Remote non DC sites ###
 ip address 10.202.81.1 255.255.255.0
!
interface Vlan90
 description ### Ground Floor Data ###
 ip address 10.202.90.1 255.255.254.0
 ip helper-address 10.2.8.17
!
interface Vlan92
 description ### First Floor Data ###
 ip address 10.202.92.1 255.255.254.0
 ip helper-address 10.2.8.17
!
interface Vlan94
 description ### Second Floor Data ###
 ip address 10.202.94.1 255.255.254.0
 ip helper-address 10.2.8.17
!
interface Vlan96
 description ### Third Floor Data ###
 ip address 10.202.96.1 255.255.254.0
 ip helper-address 10.2.8.17
!
0
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 18850701
Sorry, I don't know what I was thinking about because you can't specify an interface as a destination for an IP helper.

What you can do is have multiple IP helpers

So just go to the VLAN interfaces and add an IP helper for the RIS server.
0

Featured Post

Enabling OSINT in Activity Based Intelligence

Activity based intelligence (ABI) requires access to all available sources of data. Recorded Future allows analysts to observe structured data on the open, deep, and dark web.

Join & Write a Comment

Suggested Solutions

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now