Solved

GPRS connection Error Code: 35865

Posted on 2007-04-04
2
874 Views
Last Modified: 2013-12-21
Hello Experts:

I am using Multitech GPRS modem. Usually I left my modem connected until and unless I want  to shut down my computer. Yesterday While I was going home I just disconnect the connection with the AT Command (AT#CONNECTIONSTOP).Next Morning when I tried to connect to the modem it just gives me an error message #CME ERROR: 35865. While I tried to rectify this error I found out that this error means I am not registered on the network.I dont Know how to fix this error. One thing more, On the current status I can still receive the SMS message through my Mobile fone, I think this mean that I am still connected in GSM mode but not in GPRS mode..How can I connect to GPRS mode.
0
Comment
Question by:babubhai
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 

Author Comment

by:babubhai
ID: 18850918
Hello Experts:

Thanks for giving time to read my question.Actully I find out the solution of my problem.
To  connect the modem in GPRS mode use the following command first
AT+CGATT=1
this command will register your device on the network ( I dont no how you can register
the device without connecting to the network but thats how its work on my case).
and then you can establish the connection by using this command
AT# connectionstart.


Mr.Moderator: Can I take the points of this question as I really work hard to find out the
solution of this problem.

thanks.

0
 

Accepted Solution

by:
EE_AutoDeleter earned 0 total points
ID: 18998855
babubhai,
Because you have presented a solution to your own problem which may be helpful to future searches, this question is now PAQed and your points have been refunded.

EE_AutoDeleter
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Can't connect to wireless network using Radius 2 35
Patch panel 7 57
Windows Server to Cisco switch connectivity 10 102
Sonicpoint Ni capabilities 5 36
With the purchase of CloudCommand by Comcast customers are left in a bind as subscriptions expire and render the AP's disabled. The following will explain how to flash your Ubiquiti AP's with CloudCommand firmware back to Ubiquiti firmware. HOWTO…
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question