Solved

Integrating VPN  file coping in.net

Posted on 2007-04-04
3
258 Views
Last Modified: 2013-11-06
I would like to create a windows services that uses vpn tunnel to copy files between 2 servers accoring to some conditions.How will I integrate vpn in .net  ?

Thanks in Advance
0
Comment
Question by:assyst
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 77

Accepted Solution

by:
Rob Williams earned 500 total points
ID: 18854854
In my opinion; if you have two sites, each with a server, I would think it justifies a hardware VPN solution that would have the tunnel always available. Then copying files would be done in the same way as on the local network with no need to first establish the tunnel. Though a pair of Cisco routers would be my first choice. If you have a limited budget ,2 Linksys RV042's ( ≈$200 US ea), 2 Linksys BEFVP41's ( ≈$125 ea), or 2 Netgear FVS318's ( ≈$150 ea) will do the job quite nicely.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

For a while, I have wanted to connect my HTC Incredible to my corporate network to take advantage of the phone's powerful capabilities. I searched online and came up with varied answers from "it won't work" to super complicated statements that I did…
OpenVPN is a great open source VPN server that is capable of providing quick and easy VPN access to your network on the cheap.  By default the software is configured to allow open access to your network.  But what if you want to restrict users to on…
The viewer will learn how to use and create new code templates in NetBeans IDE 8.0 for Windows.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question