Solved

No record of File Replication System, SYSVOL started - DCDIAG Errors

Posted on 2007-04-04
4
5,315 Views
Last Modified: 2013-12-05
When Running DCDiag on my a newly installed DC I get this error:

Starting test: frssysvol
         Error: No record of File Replication System, SYSVOL started.
         The Active Directory may be prevented from starting.
         ......................... S-DCBKUP-07 passed test frssysvol
      Starting test: kccevent
         An Information Event occured.  EventID: 0x40000456
            Time Generated: 04/04/2007   09:57:49
            (Event String could not be retrieved)
         ......................... S-DCBKUP-07 failed test kccevent
      Starting test: systemlog
         An Error Event occured.  EventID: 0xC0001B70
            Time Generated: 04/04/2007   09:53:44
            (Event String could not be retrieved)
         ......................... S-DCBKUP-07 failed test systemlog

I went into site and services and selected replicate now, waited 1/2 hour and checked, no improvement.

I checked event viewer, there are no entries in the File Replication area and only informational records in the Directory Service area.

When I forced the replication, this event was logged in the application log:
Event Type:      Warning
Event Source:      MRxSmb
Event Category:      None
Event ID:      3019
Date:            4/4/2007
Time:            9:56:01 AM
User:            N/A
Computer:      S-DCBKUP-07
Description:
The redirector failed to determine the connection type.

any help would be greatly appriciated!

Thanks
Steve
0
Comment
Question by:AccessYourBiz_Com
  • 2
4 Comments
 
LVL 13

Accepted Solution

by:
strongline earned 250 total points
ID: 18852744
Is the SYSVOL folder shared out?
Do you see event 13516 that says "frs is not preventing this DC becomes a DC blah blah..."?

If you don't see either, then run more diagnostic tests such as netdiag. Most of the time the cause lies in your DNS/network.

the simplest way to test if your FRS is working:
add a blank folder under one of the policy folder, see if that new folder being replicated to other DCs. Do it for both directions.

MS provides tools such as frsdiag, ultrasound to check frs health.
0
 
LVL 13

Assisted Solution

by:haim96
haim96 earned 250 total points
ID: 18856185
open up AD site and services, check your conncetor  (rpc/tcp) setting.

check out  the articles:
http://support.microsoft.com/kb/315244
http://www.eventid.net/display.asp?eventid=3019&eventno=149&source=MRxSmb&phase=1
0
 
LVL 3

Author Comment

by:AccessYourBiz_Com
ID: 18863425
Thanks for the sugestions, when I read the article which Haim96 provided, It details that the issue is known, but there appears to be no recommented action?
0
 
LVL 13

Expert Comment

by:strongline
ID: 18863479
we don't just search internet to match whatever event you see. 3019 is a very common event that most of the time you can safely ignore it.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles to another domain controller. Log onto the new domain controller with a user account t…
This tutorial will walk an individual through the process of configuring their Windows Server 2012 domain controller to synchronize its time with a trusted, external resource. Use Google, Bing, or other preferred search engine to locate trusted NTP …

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now