Solved

draft-n wireless bridge

Posted on 2007-04-04
3
243 Views
Last Modified: 2013-11-09
What is the best product for draft-n wireless bridge? What are the best antennas to use? I need it to connect 3 building that are within a 1.5 mile of each other.
0
Comment
Question by:KLMMAM
  • 2
3 Comments
 
LVL 11

Expert Comment

by:jekl2000
ID: 18858042
Draft-n uses mimo technology, multiple in multiple out antennas designed really to reduce multipathing thus increase throughput and are not really well suited for bridging buildings where you want a point to point or point to multipoint link.
0
 

Author Comment

by:KLMMAM
ID: 18859611
Would you recommend using the 802.11g then instead? what would be the best product and antennas for that?
0
 
LVL 11

Accepted Solution

by:
jekl2000 earned 500 total points
ID: 18860237
Without the spectrum being analyzed between the buildings, it would  be a guess to tell you that 802.11g would be the best.  If there are already 2.4ghz networks in the area between the buildings then it may not be a good choice. In this case 5.8ghz radios may be better.

There are alot of things to consider when building a 1.5 mile link.

Here is something to get you started, this is what you use to determine the antenna gain, height of the antenna do to the freznel zone etc.  It is called a link budget....

http://www.ecommwireless.com/cgi-local/wireless.main.cgi
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hello All, I have been training on Multicast for a while now and whenever I start the topic , I find out that my friends /  Colleagues mention that they do not know how to test Multicast Joins. As most of the multicast would be video traffic and …
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …
A short tutorial showing how to set up an email signature in Outlook on the Web (previously known as OWA). For free email signatures designs, visit https://www.mail-signatures.com/articles/signature-templates/?sts=6651 If you want to manage em…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question