Solved

GSM - sending sms speed is blocked by the incoming call

Posted on 2007-04-09
2
559 Views
Last Modified: 2013-12-09
Hi,
 I am developing software to send bulk sms. I have motorola L2 mobile. I have one library downloaded from sourceforge.net Which sends AT commands to the modem.  When the mobile is started to send messages, It sends 30 to 34 messages per minute. When it receives a single incoming call it is getting slow. It sends only 6 to 10 messages per minute. Even after the call ends.

After ending the voice call also it didn't pick up the previous speed.

Before voice call - 30 to 34  sms per minute.
During the voice call - 1 to 3 sms per minute.
After ending the voice call - 6 to 10 sms per minute.

My problem is, why it didn't send 30 - 34 sms per minute even after ending the voice call.

  Now I need to keep the same speed when it started to send.
Or atleast can i block the all incoming calls (even missed calls also). Is there any AT commands to avoid incoming calls or any other go?


Platform Information:
1) Visual Studio 2005 with DotNet Framework 2.0 (C#.Net)
2) Zippys USB Dongle with BlueSoleil 2.1.3.0
3) Motorola L2 mobile
4) SMSLib Library as core, downloaded from SourceForge.net

Thanks in advance.
0
Comment
Question by:godwindotnet
2 Comments
 
LVL 3

Accepted Solution

by:
KiyamKadir earned 500 total points
ID: 18909811
what i am suggesting is a simple DIVERT ALL INCOMING VOICE / CALL to any where you like.

then your problem should be solved, since by this you never receive the ALRT signal on the GSM handset and therefore the timeslot between mobile and BTS will never cleared from Data to Voice.

give it a try.

0
 

Author Comment

by:godwindotnet
ID: 18916956
Thank you so much. It works fine. If you find any solution other than this also please update me.
Regards,
godwin
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
Using in-flight Wi-Fi when you travel? Business travelers beware! In-flight Wi-Fi networks could rip the door right off your digital privacy portal. That’s no joke either, as it might also provide a convenient entrance for bad threat actors.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

24 Experts available now in Live!

Get 1:1 Help Now