Solved

Nortel VPN Connection Issue: Error - Eacfilt driver must be enabled on interface(s)

Posted on 2007-04-10
3
14,095 Views
Last Modified: 2009-10-17
On installing Nortel VPN software on my laptop, it appears I can only use the wireless card to access VPN. When I try using the inbuilt ethernet port, I get the following error immediately when I click on connect:
"Eacfilt driver must be enabled on interface(s)
<my interface card>"
I have tried installing the VPN client while connected thru the ethernet port and also reinstalled my OS to no avail. Under the nic properties, the eacfilt service is checked.
0
Comment
Question by:pbarry30
3 Comments
 
LVL 77

Accepted Solution

by:
Rob Williams earned 500 total points
ID: 18885587
I am not familiar with your issue, but doing a little digging I see someone else, with a similar issue, was able to resolve by adding a copy of the eacfilt.sys  file to the Nortel folder. A little tinkering, if no other options, might resolve:
http://tek-tips.com/viewthread.cfm?qid=1097610&page=1

I have also read that this issue is common with the 5.01.103 version of the client, but that versions 5.01.100 and 5.01.141 both seem to work fine. Is it possible to try another client version.
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question