NFS problem

My name is Mud
My name is Mud used Ask the Experts™
on
Where should I start??? Damn...

Ok... I have a linux redhat (I think is 8) it was setup (not by me ofcourse) as a server and it shared some folders/files with other PCs (4), we made some changes on the lines and the PCs were relocated ONLY!!! and now as you power on the server it just stays on the starting NFS... but just before that it gives an error:

Mounting NFS filesystems: mount: RPC: Program not registered:
mount: RPC: Program not registered:                                                                       [FAILED]
Mounting other filesystems:                                                                                      [OK]
Starting Automount: no mountpoints defined                                                           [OK]
Starting sshd:                                                                                                           [OK]
Starting xinetd:                                                                                                         [OK]
Starting lpd: no printer defined:                                                                               [OK]
Starting NFS services

and just stays there, I see an activity in the led of the HDD. If I skip the loading of that service and in the GUI try to start the service is the same... WTF??? can anyone give me a hand... what info/file/stuff should I check??? I checked the /etc/exports and the folders exists... one other thing, I check one folder and it was loaded with files (>5000) so I delete'em and flush the trash... HELP...
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®

Commented:
paste the output of :

dmesg
/var/log/syslog
/var/log/messages

Commented:
Did you update the kernel ?

Does /proc/filesystems have a 'nfs' entry ?
My name is MudSystems Engineer

Author

Commented:
Syslog...
**************************************************************
Linux version 2.4.20-18.8 (bhcompile@daffy.perf.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu May 29 07:40:27 EDT 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000ff70000 (usable)
 BIOS-e820: 000000000ff70000 - 000000000ff7a000 (ACPI data)
 BIOS-e820: 000000000ff7a000 - 000000000ff80000 (ACPI NVS)
 BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65392
zone(0): 4096 pages.
zone(1): 61296 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.20-18.8 hdc=ide-scsi root=LABEL=/
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2660.026 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5308.41 BogoMIPS
Memory: 252604k/261568k available (1335k kernel code, 6536k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:1d.2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:1d.2
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6L250R0, ATA DISK drive
blk: queue c03a5260, I/O limit 4095Mb (mask 0xffffffff)
hdc: MATSHITADVD-ROM SR-8588, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(100)ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 129k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 9 for device 00:1d.7
PCI: Setting latency timer of device 00:1d.7 to 64
ehci-hcd 00:1d.7: PCI device 8086:24dd (Intel Corp.)
ehci-hcd 00:1d.7: irq 9, pci mem d0849000
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 128.
ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 8 ports detected
usb-uhci.c: $Revision: 1.275 $ time 07:47:38 May 29 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.3
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1052248k swap-space (priority -1)
hub.c: new USB device 00:1d.3-1, assigned address 2
usb-uhci.c: interrupt, status 2, frame# 544
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:1d.3-1, assigned address 3
input0: USB HID v1.00 Mouse [0461:4d09] on usb5:3.0
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MATSHITA  Model: DVD-ROM SR-8588   Rev: 7Z20
  Type:   CD-ROM                             ANSI SCSI revision: 02
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
Intel(R) PRO/100 Network Driver - version 2.2.21-k1
Copyright (c) 2003 Intel Corporation

PCI: Found IRQ 11 for device 03:08.0
e100: selftest OK.
divert: allocating divert_blk for eth0
e100: eth0: Intel(R) PRO/100 Network Connection
  Hardware receive checksums enabled

e100: eth0 NIC Link is Up 100 Mbps Full duplex
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
e100: eth0 NIC Link is Up 100 Mbps Full duplex
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
**************************************************************

Messages...
**************************************************************
Linux version 2.4.20-18.8 (bhcompile@daffy.perf.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu May 29 07:40:27 EDT 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000ff70000 (usable)
 BIOS-e820: 000000000ff70000 - 000000000ff7a000 (ACPI data)
 BIOS-e820: 000000000ff7a000 - 000000000ff80000 (ACPI NVS)
 BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65392
zone(0): 4096 pages.
zone(1): 61296 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.20-18.8 hdc=ide-scsi root=LABEL=/
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2660.026 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5308.41 BogoMIPS
Memory: 252604k/261568k available (1335k kernel code, 6536k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:1d.2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 5 for device 00:1f.1
PCI: Sharing IRQ 5 with 00:1d.2
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6L250R0, ATA DISK drive
blk: queue c03a5260, I/O limit 4095Mb (mask 0xffffffff)
hdc: MATSHITADVD-ROM SR-8588, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(100)ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 129k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 9 for device 00:1d.7
PCI: Setting latency timer of device 00:1d.7 to 64
ehci-hcd 00:1d.7: PCI device 8086:24dd (Intel Corp.)
ehci-hcd 00:1d.7: irq 9, pci mem d0849000
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 128.
ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 8 ports detected
usb-uhci.c: $Revision: 1.275 $ time 07:47:38 May 29 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 00:1d.3
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:1d.2
PCI: Sharing IRQ 5 with 00:1f.1
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.3
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0x1860, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 1052248k swap-space (priority -1)
hub.c: new USB device 00:1d.3-1, assigned address 2
usb-uhci.c: interrupt, status 2, frame# 544
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:1d.3-1, assigned address 3
input0: USB HID v1.00 Mouse [0461:4d09] on usb5:3.0
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MATSHITA  Model: DVD-ROM SR-8588   Rev: 7Z20
  Type:   CD-ROM                             ANSI SCSI revision: 02
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
ip_tables: (C) 2000-2002 Netfilter core team
Intel(R) PRO/100 Network Driver - version 2.2.21-k1
Copyright (c) 2003 Intel Corporation

PCI: Found IRQ 11 for device 03:08.0
e100: selftest OK.
divert: allocating divert_blk for eth0
e100: eth0: Intel(R) PRO/100 Network Connection
  Hardware receive checksums enabled

e100: eth0 NIC Link is Up 100 Mbps Full duplex
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
e100: eth0 NIC Link is Up 100 Mbps Full duplex
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Down
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
e100: eth0 NIC Link is Up 100 Mbps Full duplex
sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
sr0: CDROM not ready.  Make sure there is a disc in the drive.
hub.c: new USB device 00:1d.7-8, assigned address 2
usb.c: USB device 2 (vend/prod 0x930/0x6532) is not claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: Kingston  Model: DataTraveler 2.0  Rev: 1.04
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 501760 512-byte hdwr sectors (257 MB)
sda: Write Protect is off
 sda: sda1
**************************************************************

FileSystems...
**************************************************************
nodev   rootfs
nodev   bdev
nodev   proc
nodev   sockfs
nodev   tmpfs
nodev   shm
nodev   pipefs
             ext2
nodev   ramfs
             iso9660
nodev   devpts
             ext3
nodev   usbdevfs
nodev   usbfs
nodev   autofs
             vfat
**************************************************************


>>Did you update the kernel ?

I only wish... No... I don't even know what are you talking about... sort of...
Bootstrap 4: Exploring New Features

Learn how to use and navigate the new features included in Bootstrap 4, the most popular HTML, CSS, and JavaScript framework for developing responsive, mobile-first websites.

My name is MudSystems Engineer

Author

Commented:
I unhook the DVD and restarted, and now it stays on this line...


Mounting NFS filesystems:
My name is MudSystems Engineer

Author

Commented:
Nevermind the last comment... forgot I mess arround with the ip address...
My name is MudSystems Engineer

Author

Commented:
Ok, the problem was on the exports file /etc/exports instead of host=* I made the subnet x.x.x.*
My name is MudSystems Engineer

Author

Commented:
Now the hosts can mount the folders, but some programs can't run, expecialy one that wants a file thru IP... like

proggy nfs:\\x.x.x.x\sharedfolder\fileX

but I see the fileX thru the mounted sharedfolder... damn this is weird...

Commented:
Hmm..

try doing

nfs://x.x.x.x/sharedfoler/fileX

The direction of the slashes is usually 'forward' for unix based URI's
My name is MudSystems Engineer

Author

Commented:
Already did that, no effect...what I have suggested was to delete the IP since the sharedfolder is already shared, I execute the line like

proggy //sharedfolder/fileX and it does execute with alot of errors since the script makes alot of access to the IP instead of the shared folder... I told'em to replace each entry but... no way!!! ok... whatever... damn this really sucks...
Commented:
It appears your kernel doesn't have NFS support enabled.

If you look at /proc/filesystems, there is no reference to nfs

There should be lines that look like this (might be one or the other or both)

nodev   nfs
nodev   nfs4

What is the output of : (Substitute the path to your .config if it is not symlinked to /usr/src/linux)

grep CONFIG_NFS /usr/src/linux/.config
My name is MudSystems Engineer

Author

Commented:
NO, damn it...

FDISK and FORMAT!!! full reistall... thanks anyway!!!

Commented:
Fdisk and reformat are for the WEAK!

or the person who just needs to get the job done quickly :)

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial