Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
?
Solved

Cisco H 323 router

Posted on 2007-07-21
5
Medium Priority
?
1,099 Views
Last Modified: 2008-01-09
Hi there

I'm looking for a cisco router that support h323   can any advice me and give some cisco models that support h323 because i can't find any ..



0
Comment
Question by:greekstones
  • 3
  • 2
5 Comments
 
LVL 79

Expert Comment

by:lrmoore
ID: 19538504
All of the 2600, 2800, 3800 series routers do, with the right feature set. What exactly are you trying to support? h323 gateway? All of the Voip capable routers use h323.
0
 
LVL 6

Author Comment

by:greekstones
ID: 19538809
well i  trying to do a connection over the internet to Albania

i have a call manager 4.2 and i want users here in uk when they dial the Albanian number to go to Albanian telecome which is in Albania.

The Albania Telecome supports H.323 or Sip Trunk. but  i was thinking the cheapest way is by h.323.

all i want is router that connects me to Albanian h.323 terminator .

any helps with config will be great.

many thanks


 

0
 
LVL 79

Expert Comment

by:lrmoore
ID: 19540096
h323 gateway is what you're looking for to work with your CallManager
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fvvfax_c/vvf323gw.htm
You also need an IOS feature set that supports the gateway function.
For example with a 3825 router, you would need the INT VOICE/VIDEO, IPIP GW, TDMIP GW feature set available in IOS c3825-ipvoice_ivs-mz.124-4.XC
0
 
LVL 6

Author Comment

by:greekstones
ID: 19540147
ok i have router 2621xm will it work ?

Router>sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(24), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 28-Apr-04 15:30 by kellmill
Image text-base: 0x8000808C, data-base: 0x8111AE9C

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c2600-is-mz.122-24"

cisco 2621XM (MPC860P) processor (revision 0x301) with 125952K/5120K bytes of memory.
Processor board ID FOC08340UVD (2792568315)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
49152K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router>sh diag
Slot 0:
        C2621XM 2FE Mainboard Port adapter, 3 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 3.1
        PCB Serial Number        : FOC08340UVD (2792568315)
        Part Number              : 73-7754-05
        RMA History              : 00
        RMA Number               : 0-0-0-0
        Board Revision           : A0
        Deviation Number         : 0-0
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 03 6D 41 03 01 C1 18 46 4F 43 30 38 33
          0x10: 34 30 55 56 44 20 28 32 37 39 32 35 36 38 33 31
          0x20: 35 29 82 49 1E 4A 05 04 00 81 00 00 00 00 42 41
          0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 0:
        Serial 1T WAN daughter card
        Hardware revision 1.0           Board revision B0
        Serial number     32732294      Part number    800-01514-02
        Test history      0x0           RMA number     00-00-00
        Connector type    Wan Module
        EEPROM format version 1
        EEPROM contents (hex):
          0x20: 01 02 01 00 01 F3 74 86 50 05 EA 02 00 00 00 00
          0x30: 58 00 00 00 04 08 29 01 FF FF FF FF FF FF FF FF


 


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~end~~~~~~~~~~~~~~~~~~~~~~~

0
 
LVL 79

Accepted Solution

by:
lrmoore earned 1500 total points
ID: 19540191
http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_guide_chapter09186a00803fecb0.html#wp1044594
Accroding to this guide, yes, your 2621 will work if you get the IOS version c2600-ipvoice_ivs-mz
(see table 2 in the link)
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I recently purchased a Bluetooth headset called the Music Jogger (model BSH10). The control buttons on it look like this: One of my goals is to use it as the microphone and speakers for Skype calls. In that respect, it works well. However, I …
As companies replace their old PBX phone systems with Unified IP Communications, many are finding out that legacy applications such as fax do not work well with VoIP. Fortunately, Cloud Faxing provides a cost-effective alternative that works over an…
With just a little bit of  SQL and VBA, many doors open to cool things like synchronize a list box to display data relevant to other information on a form.  If you have never written code or looked at an SQL statement before, no problem! ...  give i…
Kernel Data Recovery is a renowned Data Recovery solution provider which offers wide range of softwares for both enterprise and home users with its cost-effective solutions. Let's have a quick overview of the journey and data recovery tools range he…
Suggested Courses
Course of the Month14 days, 1 hour left to enroll

581 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question