I need a dial-peer configuration for cisco

I need a dial-peer configuration for my cisco 2811 router as part of the SRST plan, I am using MGCP

I have 1 fxo port 0/2/0 connected to a working phone line.

I need a configuration that will allow IP phones to dial a local or long distance number through fxo when Call manager is down.
Note:  Phones are set to dial 9 for outside lines (when using call manager)

I would also like to direct incoming calls (fxo) to a specific extension ie 310.

thanks
tashmoreAsked:
Who is Participating?
 
dinkon4uCommented:

Hi,

following are the commands for dial peer for outboud calls:

dial-peer voice 100 pots
 destination-pattern 9T
port 0/2/0


following are the commands to enable terminate incoming call to 310********

voice-port 0/2/0
connection plar opx 310
no shut


thanks
 
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.