Want to protect your cyber security and still get fast solutions? Ask a secure question today.Go Premium

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 5463
  • Last Modified:

SBS 2003 IP Configuration Problem. Dell 2900 Broadcom NetIIextreme dual NIC

Dell Poweredge 2900 Server
2x Broadcom NetIIExtreme NICs.

SBS 2003 Standard

I installed SBS in the normal manner.  I installed the NIC drivers.
Set a static IP on NIC 1 and a static on the internal NIC

I ran the CEICW.  When it asks which NIC to use for the ISP/LAN the NIC with the external IP shows the IP address however the other NIC shows nothing.
If I run an IPCONFIG/all it shows NIC2 as DHCPd...  Hmm Weird I think.  So I go back to the NIC properties and sure enough is set to DHCP.  So I reset to static and run an IPconfig.  NIC1 now says its DHCPd.  Hmm Go to properties and sure enough it is..  I reset it and the other NIC goes back to DHCP.  I can go on all night but you get the point.

I went into the broadcom util but there arent any settings regarding dhcp/static ip.

Driving me a little crazy.  Any help would be great.

I have uninstalled and reinstalled the NICs. (they are onboard.)
I also removed the hidden WAN mini port (IP) which was discussed in a KB regarding the RRAS problem which is throwing an error on boot.  I assumed this would go away after running the CEICW but obviously that wont happen when the NICs are acting squirlly.
0
livegirllove
Asked:
livegirllove
  • 23
  • 13
1 Solution
 
livegirlloveAuthor Commented:
From the Dell Site regarding the NICs.
    * Dual embedded Broadcom®  NetXtreme IITM  5708 Gigabit Ethernet3 NIC with fail-over and load balancing
    * TOE (TCP/IP Offload Engine) supported on Microsoft®  Windows Server®  2003, SP1 or higher with Scalable Networking Pack

0
 
livegirlloveAuthor Commented:
oh and they are not teamed in the Broadcom utility..
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
When you ran the CEICW what did you say your network configuration was?

Also, can you please post a complete ipconfig /all from the server?

Jeff
TechSoEasy
0
Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 
livegirlloveAuthor Commented:
2 nic.

I'll post asap.  I gotta plug her in at home.
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
FYI, you need to have your Internal NIC plugged into something (a switch is fine, but something needs to be there).

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
yup

been there.  first thing on my checklist for all new sbs is plug in empty hub to second (LAN) NIC.
0
 
livegirlloveAuthor Commented:
Ok this is plugged in at home getting DHCP on the internet side from my router.  
im on the internet.

Fails with same issue on Network settings.  
Weird how it shows the IP address of the LAN nic when ipconfig or in the support tab of the properties.  but when SBS always you to choose which NIC is for ISP/LAN it shows only the IP for the Internet NIC and shows blank for the LAN adapter.

Windows IP Configuration



   Host Name . . . . . . . . . . . . : catalystsvr01

   Primary Dns Suffix  . . . . . . . : Catalyst.lan

   Node Type . . . . . . . . . . . . : Hybrid

   IP Routing Enabled. . . . . . . . : No

   WINS Proxy Enabled. . . . . . . . : No

   DNS Suffix Search List. . . . . . : Catalyst.lan

                                       oc.cox.net



Ethernet adapter LAN:



   Connection-specific DNS Suffix  . :

   Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client) #2

   Physical Address. . . . . . . . . : 00-19-B9-CF-9A-E7

   DHCP Enabled. . . . . . . . . . . : Yes

   Autoconfiguration Enabled . . . . : Yes

   Autoconfiguration IP Address. . . : 192.168.16.1

   Subnet Mask . . . . . . . . . . . : 255.255.255.0

   Default Gateway . . . . . . . . . :

   DNS Servers . . . . . . . . . . . : 192.168.16.1



Ethernet adapter INTERNET:



   Connection-specific DNS Suffix  . : oc.cox.net

   Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client)

   Physical Address. . . . . . . . . : 00-19-B9-CF-9A-E9

   DHCP Enabled. . . . . . . . . . . : Yes

   Autoconfiguration Enabled . . . . : Yes

   IP Address. . . . . . . . . . . . : 192.168.9.101

   Subnet Mask . . . . . . . . . . . : 255.255.255.0

   Default Gateway . . . . . . . . . : 192.168.9.200

   DHCP Server . . . . . . . . . . . : 192.168.9.200

   DNS Servers . . . . . . . . . . . : 192.168.9.200

   Lease Obtained. . . . . . . . . . : Tuesday, July 24, 2007 6:40:14 PM

   Lease Expires . . . . . . . . . . : Tuesday, July 31, 2007 6:40:14 PM
0
 
livegirlloveAuthor Commented:
weird.  I ran that ipconfig after running the ceicw.  I had just checked it before and it had the LAN nic as DHCP enable = NO.  Now after running CEICW it is set to DHCP.  (*obviously no DHCP in a empty hub)  Sure enough got to properties and its back to DHCP...

0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
You're looking at it backwards.

DHCP is running on your EXTERNAL NIC (probably from the Cable Modem from Cox?).

If you selected "direct Internet Connection" when you ran the CEICW that would modify that NIC.  You need to select "conneted to a router" for it to not be modified.  Then, be sure to set a static IP on the External NIC that is within the Cable Modem's Subnet (since it assigned 192.168.9.101, you can probably just give it 192.168.9.99 and be safe).  DNS should be 192.168.16.1 and gateway should be 192.168.9.200.

You also need to add a WINS Server IP on your Internal NIC as 192.168.16.1

Jeff
TechSoEasy
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
FYI, I'd set your INTERNAL NIC to 192.168.16.2 instead (and all the references I made above would be 192.168.16.2 as well then)

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
look at it again...

It has both adapters set to DHCP after the CEICW.
I did use the connected to a router option.

I tried to set a static on the internal and external.  The problem is I set one to static and the other one goes dynamic even without running ceicw.  I set it back to static and it changes the other to dhcp.  Its crazy.

This is not my first SBS setup, I know the wizards pretty well.  The problem seems to be more related to the NICs / OS than SBS.  
0
 
livegirlloveAuthor Commented:
Update
I downloaded the drivers from Broadcoms site and installed them.  Im getting closer.  Both NICs will stay Static IP even though the CEICW still fails.  LOL
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Where does it fail?  What's the error in the ICWLOG.txt file?

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
error 0x1 returned from call to CRFireCommit::ValidatePropertyBag no RRAS NAT Public Interface, Basic Firewall will not be configured.

and I lost internet on it now.  Also DHCP just went away in computer management.  I removed routeing and remote access.

I reinstalled Networking and Administration modules through add/remove programs  Change Small Business Server

0
 
livegirlloveAuthor Commented:
Windows IP Configuration

   Host Name . . . . . . . . . . . . : catalystsvr01
   Primary Dns Suffix  . . . . . . . : Catalyst.lan
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : Catalyst.lan

Ethernet adapter LAN:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Broadcom BCM57
 VBD Client)
   Physical Address. . . . . . . . . : 00-19-B9-CF-9A
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.16.2
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 192.168.16.2
   Primary WINS Server . . . . . . . : 192.168.16.2

Ethernet adapter INTERNET:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Broadcom BCM57
 VBD Client) #2
   Physical Address. . . . . . . . . : 00-19-B9-CF-9A
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 192.168.9.99
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.9.200
   DNS Servers . . . . . . . . . . . : 192.168.16.2


ICWlog
7/24/2007 9:44 PM
C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizinet.dll, version 5.2.2893.0
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Call to Reading hardware selection () returned ok.
Hardware selection: 0
Call to Validating hardware selection () returned ok.
Call to Reading LAN NIC Guid () returned ok.
LAN NIC Guid: {7B3C2142-BECC-475E-A9D9-2D3523FECF7E}
Call to Validating LAN NIC Guid () returned ok.
Call to Validating NIC properties () returned ok.
Broadband selection: 1
Call to Validating broadband selection () returned ok.
calling CNetCommit::ValidateRouterConnectionProperties ().
Call to Reading UPNP selection () returned ok.
NOT a UPnP router
Call to Reading Router IP () returned ok.
Router IP: 192.168.9.200
Call to Validating Router IP () returned ok.
Call to Reading preferred DNS server IP () returned ok.
Preferred DNS server IP: 216.116.96.2
Call to Validating preferred DNS server IP () returned ok.
Call to Reading alternate DNS server IP () returned ok.
Alternate DNS server IP: 216.116.96.3
Call to Validating alternate DNS server IP () returned ok.
Call to Validating preferred and alternate DNS servers () returned ok.
Call to Reading router on second NIC () returned ok.
Router is connected through the second NIC
Call to Reading LAN NIC Guid () returned ok.
LAN NIC Guid: {7B3C2142-BECC-475E-A9D9-2D3523FECF7E}
Call to Validating LAN NIC Guid () returned ok.
Call to Reading 2nd NIC Guid () returned ok.
External NIC Guid: {C3620DF2-08D7-4FFA-878C-5BF47EF90BE7}
Call to Validating external NIC Guid () returned ok.
Call to CNetCommit::ValidateRouterConnectionProperties () returned ok.

7/24/2007 9:44 PM
C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
calling CRFireCommit::ValidatePropertyBag (0x2d9280).
Error 0x1 returned from call to CRFireCommit::ValidatePropertyBag no RRAS NAT Public Interface, Basic Firewall will not be configured.().

7/24/2007 9:44 PM
C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizcert.dll, version 5.2.2893.0
Calling CCertCommit::ValidatePropertyBag
Require SSL for OWA: 1
Require SSL for Remote Portal: 1
Require SSL for Monitoring: 0
Require SSL for OMA: 0
Require SSL for CompanyWeb: 0
Require 128 Bit Encryption: 1
Cert selection: 1
Web server name: office.catalysthouse.com
CCertCommit::ValidatePropertyBag returned OK

7/24/2007 9:44 PM
C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizemail.dll, version 5.2.2893.0
calling CEmailCommit::ValidatePropertyBag ().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6e50c).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0x2d9280, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
calling ReadBool (0x2d9280, F71526DD-9C19-4fe9-B7DB-FD4360909275).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x2d9280, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadBool () returned ok.
The out param of ReadBool() is 0.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadBool (0x2d9280, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling CValidatePropertyUtil.ValidatePropertyBool ().
Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
calling ReadInt4 (0x2d9280, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyLong ().
Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
calling ReadString (0x2d9280, 01637C90-B142-41C4-8520-6B2E0F891BE7).
Call to ReadString () returned ok.
The out param of ReadString() is catalysthouse.com.
calling ReadBool (0x2d9280, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
Call to ReadBool () returned ok.
The out param of ReadBool() is 1.
calling ReadInt4 (0x2d9280, C9D8697B-0D4C-4767-8F1F-4CE415098774).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is 0x2.
calling CValidatePropertyUtil.ValidatePropertyHostName ().
Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
calling AttachCommiter.Validate(pPPPBag) (0x2d9280, 01637C90-B142-41C4-8520-6B2E0F891BE7).
calling CAttachCommiter::Validate (0x2d9280).
calling CAttachCommiter::Validate:ReadVariant (0x0).
calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
Call to CAttachCommiter::Validate () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling CNetCommit::Commit (2986624).
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Property bag is not dirty, skipping validation
calling CNetCommit::Common ().
calling CNetCommit::GetLanNicInfo ().
LAN NIC Guid: {7B3C2142-BECC-475E-A9D9-2D3523FECF7E}
Call to Converting LAN NIC Guid () returned ok.
Call to Getting IP address for the LAN NIC () returned ok.
Call to Reading in the LAN NIC info () returned ok.
Call to Fixing the TCP/IP NIC Binding order () returned ok.
Dhcp server is installed and not disabled
Call to Set DHCP Server to start up automatically () returned ok.
Call to Starting DHCP server () returned ok.
DNS server is installed and not disabled
Call to Changing startup type for DNS () returned ok.
Call to Clearing DNS server entries on the LAN NIC () returned ok.
Call to Setting DNS server IP for the LAN NIC () returned ok.
Call to Resetting DNS recursion timeout () returned ok.
Call to Resetting client dns query timouts in config.dat () returned ok.
Call to DsGetDcName for local domain name () returned ok.
Call to Installing RRAS (LAN) () returned ok.
Call to Installing NAT () returned ok.
Call to Clearing all static routes () returned ok.
calling CNetCommit::DoRouter ().
Call to Configuring RRAS NAT () returned ok.
Call to Converting external NIC guid () returned ok.
Call to Clearing the default gateway on the LAN NIC () returned ok.
Call to Clearing the default gateway on the external NIC () returned ok.
Call to Setting default gateway on the external NIC () returned ok.
Call to Setting DNS forwarders () returned ok.
Call to Clearing DNS servers on the external NIC () returned ok.
Call to Making sure external NIC points to the local DNS server () returned ok.
Call to GetLocalDomainName () returned ok.
Call to Deleting the DNS record for the external NIC () returned ok.
Call to Preparing DNS for DNS listener reset () returned ok.
Call to Resetting DNS listeners () returned ok.
Call to Disabling dns registration on the external NIC () returned ok.
Error 0x800706bf returned from call to Disabling services on the external NIC().
Error 0x800706bf returned from call to CNetCommit::DoRouter().
Error 0x800706bf returned from call to Configuring for router connection().
Error 0x800706bf returned from call to CNetCommit::Common().
Error 0x800706bf returned from call to CNetCommit::Commit().
calling GetBOConnector ().
Call to GetBOConnector () returned ok.
calling spADs->PutEx (ADS_PROPERTY_CLEAR, msExchSmtpOutboundSecurityPassword).
Call to spADs->PutEx () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
0
 
livegirlloveAuthor Commented:
internet back.  Im an idiot and had the cable unplugged for a minute.  
0
 
livegirlloveAuthor Commented:
FYI
When I run the CEICW it detects my D-link router and asks to configure it.  I say no...  then choose Broadband-Local Router Device

I just noticed also that it hasnt taken the router settings form any of the times I've run it because it always has the Old Router IP from the office router.  Ive run CEICW at least 5 times at home here and changed the Router IP address each time.  Maybe a clue...
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
It doesn't TAKE settings from a router it GIVES it to one... but ONLY Port Assignments, not IP Addresses.

You need to change the IP on the NIC AND the ROUTER manually.  

Also, I'm a bit amazed by this comment:

"Also DHCP just went away in computer management.  I removed routing and remote access.
I reinstalled Networking and Administration modules through add/remove programs  Change Small Business Server"

What are you thinking?  Why would you remove RRAS or reinstall Networking and Administration?

You really need to just slow down and see what's going on.  Removing or reinstalling components on a brand new installation is ridiculous and should never be done.  If you have a failed install, you reinstall completely.  But I don't think you have a faild install... you're just going too quickly without thinking.

Jeff
TechSoEasy



0
 
livegirlloveAuthor Commented:
point taken.  i have been known to click without thinking...  As long as I have time for a reinstall.  Im watching the clock.

I understand what the Upnp config does.  I was just letting you know that I didnt use that option.

Yes DHCP just disappeared form the management snapin.  I didnt remove it.  It is still in Add/Remove components.  And the service is there but wont start.  

RRAS is now green instead of red though.  
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
DHCP disappears because it detected another DHCP server.  That's how SBS works.  To re-establish DHCP on the SBS follow the steps at the bottom of this page:  http://sbsurl.com/dhcp

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
yup
i was about to post the error.

it must have picked it up when i switched cables back and forth earlier.  it said it saw another dhcp server at 9.200
0
 
livegirlloveAuthor Commented:
the link shows how to install DHCP.  So should I remove it first and then reinstall it.  
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
If the snap-in is missing you need to uninstall and reinstall.

Jeff
TechSoEasy
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Hey... make sure that network load balancing is not enabled on either of those NICs.

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
I went to DHCP in admin tools.  It shows no servers

I right click and add server.
gives option to browse or chosse on of 2 authorized servers with IP address from previous plying arounds.

I choose browse and it finds the server
however when i expand it it gives an error of the server is down or unavailable.
Checked and the service is not running.

tried to start service.

Get same error that it has found another dhcp server on the network.

Well its true.  But its on the internet side..  I triple checked my NIC names/IPs/and what they are plugged into.  Blank empty Hub on the LAN side.  My home 9.200 router on the INTERNET side.
0
 
livegirlloveAuthor Commented:
oh all the way at the bottom of the page.
i just rebooted.  Ill run the CEICW again.   with those options
0
 
livegirlloveAuthor Commented:
network load balancing is not on either.
0
 
livegirlloveAuthor Commented:

I attempted the CEICW with no changes.  It still errored on Firewall and Email.

it would not let me start the dhcp service until I unplugged the INTERNET NIC.
I then was able to start it.I then attempted the CEICW but chose the broadband connection.  and then rest leave the same.  It errored on Email but finally passed the Network Configuration part.

I just rebooted and will see what happens when I plug the Internet side back in.
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
exactly... it found a DHCP server.  It matters not that it's on the Internet side.  You can't have a DHCP server attached to your SBS if you want it to configure it's own.  But the fact that it shows servers when you browsed to add is a problem.  You need to clear those out and be sure they aren't left in either the registry or in DNS.

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
hmm
I wonder if this NIC has some type of management or something.  When I plugged it in the lights dont come on.  (this happened before and I got them back on by switching the cables around)  obviously that blew up DHCP last time.  This time Im just rebooting first to see if it sorts it out.
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
FYI you do that by right clicking on DHCP in the MMC and selecting "Manage Authorized Servers" then Unauthorize the ones that you aren't using.

Jeff
TechSoEasy
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Switching the cables around is not a good idea.  Once you configure a NIC for LAN you should mark it as such and the same for the WAN NIC.  

If you've switched the cables you should also check in Network Connections > Advanced > Advanced Settings to make sure that the LAN NIC is on top of the list above the WAN NIC.

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
still failing on the email part of ceicw.

The error according to google is related to the companyweb registry key not matching the IIS identifier.

I checked the reg key and it matches..

Any ideas on . error 0x80070003 CEMailCommit::Commit()  besides the companyweb reg key fix?
0
 
livegirlloveAuthor Commented:
sorry didnt get your previous.

I just unauthorized the other dhcp servers.

Thanks for the tip on not switching the cables I usually dont do that.
Lan is on top with file and printer/tcpip and client for ms networks/tcpip checked

Internet has only client for ms networks and its tcpip checked.  Is that correct?
0
 
Jeffrey Kane - TechSoEasyPrincipal ConsultantCommented:
Look... I can't really provide you with step-by-step, failure-by-failure support.  The concept of the site is such that you need to have a basic understanding of what you're doing and if you have specific questions that relate to accomplishing a task, then I'll be happy to answer them.  

This thread also has a bit of dejavu because I know I've helped you with an SBS install in the past.

If you are having all of these errors, then you need to start over because an installation should NEVER have this many errors.  What it demonstrates is that you did not plan properly before starting, and now you are just all over the place with this stuff.  Making this many modifications at this early in the game will only be a problem for you later on.  Additionally, as it gets later and later your judgement will not get any better.

I suggest you read this document which explains a lot about how many times it takes to install an SBS:  http://sbsurl.com/3x

The network configuration of an SBS is very well documented at http://sbsurl.com/msicw.

Furthermore the Getting Started Guide has worksheets that you should fill out before even beginning to install so that you know what's what and what will be inserted in the wizards before even starting them up.  See http://sbsurl.com/start and http://sbsurl.com/start2 for the R2 bits.

I'm going to bed.  :-)

Jeff
TechSoEasy
0
 
livegirlloveAuthor Commented:
@3x - LOL this is my 50th or so...


I reinstalled and used the NIC drivers from Broadcom as opposed to the ones on the Dell disc.  

Everything is fine.

It all got way screwy with those drivers and I probably made it worse.

This server would never have gone onsite like it was even if it did get repaired.  of all the crap ms puts out SBS doesnt give me much trouble.
But I wanted to know why it happened so I can diagnose it later.  And actually that is what this site is for.  youve always been very helpful and this question is no different but the tone in the last post was a bit dramatic.  

And what do you mean late.  Its only 1:51AM PDT.  LOL  this is prime working time.
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

  • 23
  • 13
Tackle projects and never again get stuck behind a technical roadblock.
Join Now