Learn how to a build a cloud-first strategyRegister Now

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 19247
  • Last Modified:

Get WWN of your HBA

I am trying to add a new server to our existing SAN and not sure how to find out the WWN of the HBA.
Environment Windows 2003 Enterprise
Hitachi 7500v Servies SAn
Spherion 4500 Switch

0
GRV001
Asked:
GRV001
2 Solutions
 
jazz250Commented:
Easiest way to do it, is to log into the web management of your switch, and find the port to wich this host is connected,  On the port information or zoning configuration you could easily see the WWN of the host.  do not mistake the actual WWN of the switch port with the host's WWN.

regards,
Mynor Aguilar

0
 
aaron757Commented:
If you do not control the SAN and they will not let you connect it without that information, depending on your HBA you should be able to get the WWN from it's management utility on the 2003 server. Do you know what kind of FC card you have installed? Emulex, qLogic, etc.
0
 
GRV001Author Commented:
I will split points as both helped me out. For reference in installed teh qlogic san surfer to help me out with this then updated the driver in the qlogic driver on the blade and all worked well
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now