Posted on 2007-07-24
Last Modified: 2013-11-13
I have 2 routers. one of them with ip address 10.y.y.114, and the PE router 10.y.y.113 (which I ofcours can ping. the vrf is vrf_test. on the other side I have a router with the IP 10.x.x.6 with a PE router 10.x.x.5 and the wrf on this side is vrf_prod. I do not have access to the PE routers. So what should I do to get a connection between these two routers ?
Question by:TorgN
    LVL 28

    Expert Comment

    you need to elaborate some .....

    Author Comment

    what specific information do do you need ?
    LVL 9

    Accepted Solution

    What type of connection have you on the PE routers? Leased Line/ MPLS/ xDSL etc??

    if its not an internet connection then you'll need the supplier to configure routing bewteen the 2 networks within their own core network, so gice them a ring.

    Author Comment

    It? s  not an internet connection, So I`ll have to contact my supplyer. Thanks

    Featured Post

    Do You Know the 4 Main Threat Actor Types?

    Do you know the main threat actor types? Most attackers fall into one of four categories, each with their own favored tactics, techniques, and procedures.

    Join & Write a Comment

    Suggested Solutions

    Title # Comments Views Activity
    Switch - Not showing up on solarwinds 13 66
    Alternate/Backup Port 14 45
    when should we use PVST or RPVST 11 55
    OSPF Routing Problems 9 50
    Understanding FTPS File transfer is a common requirement in most Enterprises. While there are numerous ways to get a file from Point A to Point B over a network, perhaps the most common method still in use is FTP – File Transfer Protocol. FTP is …
    We recently endured a series of broadcast storms that caused our ISP to shut us down for brief periods of time. After going through a multitude of tests, we determined that the issue was related to Intel NIC drivers on some new HP desktop computers …
    Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
    After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

    754 members asked questions and received personalized solutions in the past 7 days.

    Join the community of 500,000 technology professionals and ask your questions.

    Join & Ask a Question

    Need Help in Real-Time?

    Connect with top rated Experts

    21 Experts available now in Live!

    Get 1:1 Help Now