Configure Port Trunk/Gigabyte (2) Port for uplink on 2 2950 Switches

Hello Experts,

I  would like to configure an uplink on both my Gigaport(s)  2950 switch(s). Needs are:
(GigaPort 1)  Used as a connection to my server as a standard port(Need configuration)
(GigaPort 2) Used as a trunk port to uplink/connect to the Gigaport port 1 on my existing Switch(Need configuration on both ports/both switches)..Thanks
AtomicsteaksAsked:
Who is Participating?
 
Don JohnstonConnect With a Mentor InstructorCommented:
int g0/1
 description link to server
 switchport access vlan <vlan number>
 switchport mode access
int g0/2
 switchport mode trunk

Other swtich
int g0/1
switchport mode trunk
0
 
AtomicsteaksAuthor Commented:
Thanks for the responce Donjohnston:

would the "spanning-tree portfast" option apply here as well??
0
 
Don JohnstonInstructorCommented:
Only to ports that were NOT connected to other switches. Portfast is for port to end stations.
0
 
Don JohnstonInstructorCommented:
Only to ports that were NOT connected to other switches. Portfast is for port to end stations.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.