standard implementation routers/cores/distributers/access.....

can i have standard implementation plan for the cisco decives
two routers
tow backbone 4506
two distibuters 4503
two access 3560 one of them in vlan 10 (10.20.1.x)    and one in vlan 20 (10.20.2.x)
with ip-helper to the dhcp server 10.20.200.10  in vlan 200
and ntp and routing
and all of staff
or at least simmelar to the senario up.
thanks
nedal
nedalsdAsked:
Who is Participating?
 
nedalsdConnect With a Mentor Author Commented:
NO BODY ANSWERED ME YET?
0
 
Don JohnstonInstructorCommented:
Yes, you can.
0
 
nedalsdAuthor Commented:
what information you need me to provide you?
0
 
nedalsdAuthor Commented:
tow routers RW1 and RW2 using utp
two backbones 4506 bb1 and bb2 using fiber
two distributers 4503 dsw1 and dw2 using fiber
two access as example sw1 sw1using fiber
-each router connected to both of the backbones using fiber
-each BB connected to both of the distributers using fiber
-each distributer are connected to the two access switches using fiber

the basic setup
vlans with their interfaces
best solution for the stp and to keep the roots in the distributers
vtp
hsrp
vlan 1 for switch 1 10.10.1.x 255.255.255.0
vlan 2 for switch 2 10.10.2.X 255.255.255.0
with ip-helper to the dhcp server 10.20.200.10  in vlan 200
routing by eigrp and other staff
please send me the low level design.
thanks
nedal

0
 
nedalsdAuthor Commented:
can you answer me please
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.