• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1399
  • Last Modified:

Enable PPTP Passthrough through Watchguard Firebox III 700 to Windows 2003 Server

As title describes, I need to enable PPTP passthrough through my router to get to Windows 2003 Server. Right now, the Firebox is trying to handle the PPTP connection and is not passing PPTP on to the server as desired. Please help ASAP.
0
Axlin
Asked:
Axlin
1 Solution
 
dpk_walCommented:
You need to create a 1:1 mapping for your internal server and then specify the public IP of the server in the TO box of the PPTP service [under packet filters].

if you have a active LSS subscription or access to WG support website, please look at the article below [This article describes steps for WSM 9.0; even if you are using some earlier version, the steps would differ but the concept would remain the same]:
https://www.watchguard.com/support/faqs/fireware/90/howto_pptppassthrough.htm

Please let me know if you need more help with the configuration.

Thank you.
0

Featured Post

 The Evil-ution of Network Security Threats

What are the hacks that forever changed the security industry? To answer that question, we created an exciting new eBook that takes you on a trip through hacking history. It explores the top hacks from the 80s to 2010s, why they mattered, and how the security industry responded.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now