• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 7427
  • Last Modified:

Set Cisco Aironet 1200 to Factory Default - But Password lost!

How can i set a Set Cisco Aironet 1200 to Factory Default without know the password or username!

I know the procedure with cisco pix firewalls (tftp server and so on) but how does this work with a aironet 1200?
0
merowinger
Asked:
merowinger
  • 3
1 Solution
 
lrmooreCommented:
This document should help you reset the password so that you can then erase the config
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml
0
 
merowingerAuthor Commented:
i still checkt this document!
I have firmware 1.0.0 so i took the steps 1.0.1 or earlier!

So when i reboot teh ap and try pressing ESC when this message appears:
Type <esc> within 5 seconds for menu
It ignores me and continoues booting...dont know what to do!

But sometimes it notice my ESC press, but when i should choose a option like "C" or "1" it boots further..
0
 
merowingerAuthor Commented:
solved: with following command in hyperterminal:
:resetall
--> YES
0
 
merowingerAuthor Commented:
@irmoore:your suggestion didnt work for me somehow!

i posted what worked for me...you get the points :)
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

The 14th Annual Expert Award Winners

The results are in! Meet the top members of our 2017 Expert Awards. Congratulations to all who qualified!

  • 3
Tackle projects and never again get stuck behind a technical roadblock.
Join Now