?
Solved

Cisco vpn client for Vista - distribute profile with MSI version?

Posted on 2007-07-28
1
Medium Priority
?
2,825 Views
Last Modified: 2008-01-09
A client of ours needs to connect via a Cisco vpn client for Vista.  For all other vpn users to install we created a profile and with the install shield versions it was easy to copy the pcf profile file into the installation folder and then zip it up again and it would automatically get placed in the client profile folder on installation.  But currently, the recent versions where the Cisco vpn client supports Vista are MSI packages (5.0.01.0600,5.0.00.0340).   Just verifying this....is it correct that we cannot do our 'easy way' now until an installshield package comes out (we would prefer not to mess with building MSI transforms) ?  Is it likely a Cisco vpn installshield package coming out?
0
Comment
Question by:thefumbler
1 Comment
 
LVL 1

Accepted Solution

by:
lyncks earned 1000 total points
ID: 19612439
you are correct about not being to do that now.
about their intentions i dont know, i just install it on the few vista machines and setup the profile by hand.
good luck
0

Featured Post

What Security Threats Are We Predicting for 2018?

Cryptocurrency, IoT botnets, MFA, and more! Hackers are already planning their next big attacks for 2018. Learn what you might face, and how to defend against it with our 2018 security predictions.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
If you’re involved with your company’s wide area network (WAN), you’ve probably heard about SD-WANs. They’re the “boy wonder” of networking, ostensibly allowing companies to replace expensive MPLS lines with low-cost Internet access. But, are they …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question