Hi All ,
we have a Sbs2003 server ,been running o 2 years ok , but due to some problem the LAN NIC was replaced with a dul port card. so we splite the network so:-
Internet 192.168.0.X to router & internet
Lan 1 = 192.168.16.x (with server as 192.168.16.2)
Lan 2 - 192.168.17.x (with card / server as 192.168.17.2)
so to do a connectcomputer we had to connect them to the x.x.16.x range add them to the server then put them back on the x.x.17.x range
While the network dose work (internet , Map drives, printers all ok ) we can not get to the internet company web page (your IP is on the forbiden list) type error .
BUT also exchange keeps disconnecting and asking for user name & password on we think ts some thing to do with the new IP range not added to the server in the rigt way .
what we did was dhcp mgr and add another range, point that to 192.168.16.2(server) for gateway,etc then add 192.168.17.2 ....as well
What we would like is a walk thought so as to fine the miss config