asked on

Not all PCs are getting addresses from Netscreen DHCP, why?

Netscreen DHCP. After recovering from a lost config (restoring and older backup to the netscreen) there are several computers on the local subnet that are unable to get an address via DHCP. Where do i find what addresses have been leased on the Netscreen? I can find where to define the lease range but not who has what addresses?

Thanks
Mark

amoldkelkar

Hi,
Can you please reframe your question? Didnt get really when you mentioned what addresses have been leased on Netscreen?

Do you mean where the addresses can be found on netscreen which are in DHCP ip pool?

amoldkelkar

To find the DHCP settings and the allocated list of ips by the DHCP server running on Netscreen following cli should help you,
Lets say you have enabled DHCP server on your ethernet3 interface,
If you look at the last cli below you can even find the lease for the addresses.

nsdut-> get interface ethernet3 ?
> redirect output
| match output
<return>
dhcp show dhcp info
protocol show routing protocol details
screen show screen counter
nsdut-> get interface ethernet3 dhcp ?
> redirect output
| match output
<return>
client show dhcp client info
relay show dhcp relay agent info
server show dhcp server info
nsdut-> get interface ethernet3 dhcp server ?
> redirect output
| match output
<return>
ip show all dhcp IP state
option show all dhcp options

nsdut-> get interface ethernet3 dhcp server op
nsdut-> get interface ethernet3 dhcp server option ?
> redirect output
| match output
<return>
nsdut-> get interface ethernet3 dhcp server option
DHCP Server Options:
Lease: 3 days 0 hours 0 minutes
IP Range: 1.1.1.101 - 1.1.1.105
Netmask: 0.0.0.0
Gateway: 0.0.0.0
Domain Name:
DNS: 0.0.0.0 0.0.0.0 0.0.0.0
WINS: 0.0.0.0 0.0.0.0
SMTP: 0.0.0.0
POP3: 0.0.0.0
NEWS: 0.0.0.0
NetInfo: 0.0.0.0 0.0.0.0
nsdut->

amoldkelkar

I meant,
'get int eth3 dhcp server option'

It even tells you about the 'Lease' as well as the addresses ip range.

Hope it helps.
Do let me know

Thanks
-AK

mspencer100

ASKER

What I'm trying to find out is what address have been assigned from the DHCP server. who they were assigned to and if all addresses have been used.
Thanks
Mark

ASKER CERTIFIED SOLUTION

amoldkelkar

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial