• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 234
  • Last Modified:

Routing Protocol Help

HI I have a few questions if anyone could help me out. First I need to know if you can get routing loops with OSPF and some of the measures that are taken with this protocol to help prevent them.

Secondly I need need to know several different common routing protocols, if anyone can help me. Also if you could lead me in a direction where I could find some good information about there advantages and disadvantages that to would help out.

3 Solutions
You can try these 2 basic info on routing and routing protocol as a start. They have further links to specific routing protocol information such as OSPF and RIP.:

if you have a small network with only a couple routers I suggest RIP v2

it's fairly simple to setup and works well. All you need to do is

configure Terminal

router rip
version 2
network xxx.xxx.xxx (serial interface network)
network xxx.xxx.xxx (Fast Ethernet interface network)

just do a network xxx.xxx.xxx command for every network you have setup on that router, typically 1 per interface. If you follow these commands for every router, they will start sending updates to each other and everything should work well.

Featured Post

Get free NFR key for Veeam Availability Suite 9.5

Veeam is happy to provide a free NFR license (1 year, 2 sockets) to all certified IT Pros. The license allows for the non-production use of Veeam Availability Suite v9.5 in your home lab, without any feature limitations. It works for both VMware and Hyper-V environments

Tackle projects and never again get stuck behind a technical roadblock.
Join Now