Link to home
Start Free TrialLog in
Avatar of graypcrha
graypcrha

asked on

I get 'inaccessible boot device' error

I get 'inaccessible boot device' error
I tried safe mode same thing get blus screen of death
It bootups to  the  startup screen then  blue  screen of  death.
Windows 2000 Server  raid 5 Domain control
Avatar of captain
captain
Flag of United Kingdom of Great Britain and Northern Ireland image

Hi

Looks like a controller issue. What controller/server box is this? Do you have server warranty or component warranty on your setup, if so see whether you can get a replacement controller card.

Do you get any POST error report, array status?

hth
The only time you get the above (inaccessible boot device....) if you just perform the following change:
 - Moving a boot drive from one computer to another or replacing the boot hard drive that RAID 5 did not recover correctly
 - Upgrading the motherboard in your computer
 - Or the server was reboot by power surge damage.
Otherwise, your server get infected by a virus that could damage the boot sector or the hard drive is bad with corrupted sector. If your server was suffer a power surge, be sure the motherboard is OK. If the server was infected by virus, check the following article from Microsoft to see if you can get it fixed.
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q122926
You also want to Run CHKDSK /F to check and fix hard drive curruption, but do this step last because it will hard fix your disk and overwrite the old info.

K
Make sure you don't have any floppy disks, CDs, or bootable USB devices in the machine... just a sanity check.
fs
Avatar of graypcrha
graypcrha

ASKER

No post error
No floppy floppy disks, CDs, or bootable USB devices in the machine

here is  the exact  error
Stop 0x0000007b 0x85DE7c030 0x0000006 0x0000000
Inaccessible_Boot_ Devive

It Boots up to   the  window  screeen get about 70-80% then craches into the  blus screen
Update or reinstall controller drivers. For Windows 2000, you may have problem to download update driver. Anyway, if you cannot get the updated driver version, try to reinstall the current driver and let us know if the problem is persisted.

K
ASKER CERTIFIED SOLUTION
Avatar of lnkevin
lnkevin
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
As said, it seems to be a controller issue, please let us know which controller you have, if it has a supplimentary power pack, that may be failing....
all the best