Exchange setup: Problems with ADC wizard.

When I run ADC connection agreement wizard I get the following message:

Error: Could not read the attribute msExchHomeSyncService off the object
CN=Users: poppers.local - POPPERS\\Poppers Senco BV,CN=Active Directory Connections,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=poppers,DC=local

When I take a look at the AD with ADSIedit then I see that the mentioned key is present.

I first installed the ADC and Exchange on a server and then discovered that the RAID controller and disks weren't config as a RAID-5 but as a bunch of single volumes. So I decided too uninstall the Exchange and the ADC and reinstall the server with the disks in a RAID5.
Everything is installed now and is running. Did the connection agreement manually.
Solved all other problems like the RUS and GAL were still referring to the old server name.

How can I corrected the wrong settings in the AD concerning ADC and Exchange 2003?
What do I need to check.

Who is Participating?
Vee_ModConnect With a Mentor Commented:
Closed, 500 points refunded.
Community Support Moderator
howartAuthor Commented:
howartAuthor Commented:
Previous article solved the wizard problem, but I don't see the connection agreements created by the wizard only those I created manually.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.