Site to Site VPN between CIsco PIX 515E and Draytek Vigor 2800VG

How do I create a site to site VPN in the scenario below?

                                     OFFICE                                                               DATACENTER
       INT IP                 DRAYTEK       EXT IP                           EXT IP           CISCO PIX          INT IP     ROUTER          217.x.y.z                    213.22.y.z           515 E            213.52.y.0/24

I need to create a site to site VPN so that there is communication between servers in the internal range of the Datacenter and the internal range of our office.

I have tried numerous times and all I get is the existing connection just gets lost.

As I am no Cisco Expert, I use the ASDM, so kindly send me all instructions pertaining to this or send me the Exact IOS commands I need to type in Cisco.

Your assistance in this matter is highly appreciated
LVL 12
Imtiaz HashamTechnical Director / IT ConsultantAsked:
Who is Participating?
Imtiaz HashamConnect With a Mentor Technical Director / IT ConsultantAuthor Commented:
I found this document myself (with the help of draytek):

I have posted it here to help others.

Kind regards,
Here's an example with how to do it with a sonicwall endpoint. Using this as a guide to setting up the Draytek end and all the command line entries are there in the example

This example shows you how to use the ASDM to do the PIX end
Imtiaz HashamTechnical Director / IT ConsultantAuthor Commented:
Hi irmoore,
Thanks for the links but as I am in a live environment, I would like to avoid using the doc above. Having said that, I am going to scavenge as much information as possible from these documents.

Will keep you posted.

If there is any further information you can provide, it would be much appreciated.
Imtiaz HashamTechnical Director / IT ConsultantAuthor Commented:
I tried to look into this but there is more to this VPN than meets the eye and it just fails using the documentation provided.
I tried the same scenario with a draytek to draytek and it worked perfectly but this has failed.

I would appreciate if any more help can be provided on this.

Kind regards,
Closed, 250 points refunded.
Community Support Moderator
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.