Enbling a VIC-2FXO on a 2821 router

I need assistance in bring up a VIC-2FXO is a 2821 router.  
I can see the card recognized  in the show diag screen
Thanks

 WIC Slot 0:
        FXO Voice daughter card (2 port)
        WIC module not supported/disabled in this slot
        Hardware revision 1.1           Board revision S0
        Serial number     33696108      Part number    800-02495-01
        FRU Part Number   VIC-2FXO=
myriadsupplyAsked:
Who is Participating?
 
lrmooreCommented:
From sho ver, look at the file name of the boot image. it should say
Something like: c2800nm-ipvoicek9-mz.124-15.T1
0
 
lrmooreCommented:
What version IOS do you have? You need voice services features
What do you mean by 'bring it up'? Do you have anything plugged into it? Can you see the ports with 'show voice port summary'?
0/0/0          --  fxo-ls      up    dorm idle     on-hook  y
0/0/1          --  fxo-ls      up    dorm idle     on-hook  y
0
 
myriadsupplyAuthor Commented:
Thats right I have the IP base version of code on the 2821

From sho ver, look at the file name of the boot image. it should say
Something like: c2800nm-ipvoicek9-mz.124-15.T1

I'll upload the voice code onto the router
Thanks
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.