troubleshooting Question

Cisco Call Manager 5.1 with ISDN 2E

Avatar of WillScott250
WillScott250 asked on
Voice Over IP
3 Comments1 Solution411 ViewsLast Modified:
HI All,

Having problems configuring Cisco Call Manager 5.1 with a Cisco 2811 MGCP controlled gateway connected to 4 ISDN 2e circuits. Configured the gateway via the GUI and the gateway has successfully synced the config and is talking to Call Manager wihout any problems, the ISDN 2e endpoints are also reporting as registered. Created the nesessary route patteren and line groups etc but when making a call I receive a busy tone.

ISDN is reporting as  'MULTIPLE_FRAME_ESTABLISHED' on the gateway, and q921 messages show TX and RX messages.

Can anyone help with this?

Thanks,

ASKER CERTIFIED SOLUTION
Computer101

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 3 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 3 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros