troubleshooting Question

Pix 515 - Question about NAT with 3 interfaces + VPN

Avatar of just-one-it
just-one-it asked on
RoutersHardware FirewallsCisco
15 Comments1 Solution517 ViewsLast Modified:
Hello.  I'm trying to figure out what sort of NAT config I need to use in order to have my Pix 515 function as a normal office router (dynamic NAT for outbound traffic from the inside interface), a VPN appliance (IPSEC listening on the outside interface) and be able to route both internal traffic and vpn client traffic out to a third interface connected to a seperate network (using a dynamic NAT similar to the one on the inside->outside interfaces).  I have tried a number of NAT configs and none of them have worked, so I have a feeling I am either going about it the wrong way or I am hoping to do something which cannot be done with a Pix 515.  Any one have any ideas?  Thanks!
ASKER CERTIFIED SOLUTION
Les Moore
Systems Architect
Join our community to see this answer!
Unlock 1 Answer and 15 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 15 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros