troubleshooting Question

Need help opening a port on my PIX Firewall

Avatar of Longshot9
Longshot9 asked on
Cisco
3 Comments1 Solution253 ViewsLast Modified:
I just need to open 1 port on my Pix 515e firewall, just a random port I picked for a Torrent client, 62307.  I've tried a few things already but canyouseeme.org is still showing the port as blocked.  I would prefer to have the port available to any computer inside, but if it has to be to specific IP addresses then that is fine also, really just 2 computers need access to it.  Here's my config

: Written by enable_15 at 13:39:33.968 UTC Fri Aug 17 2007
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 2KFQnbNIdI.2KYOU encrypted
passwd p97AgcpgETifTs.Z encrypted
hostname SFPIX
domain-name cdhklaw.com
fixup protocol dns maximum-length 1024
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name 10.20.30.162 florence
access-list outside permit tcp any any eq ftp
access-list outside permit icmp any any
access-list outside deny tcp any eq 1639 any eq 1639
access-list outside permit tcp any host 2.2.2.74 eq smtp
access-list outside permit tcp any host 2.2.2.78 eq citrix-ica
access-list outside permit tcp any host 2.2.2.78 eq 1604
access-list outside permit tcp any host 2.2.2.75 eq www
access-list outside permit tcp any host 2.2.2.76 eq citrix-ica
access-list outside permit tcp any host 2.2.2.75 eq https
access-list outside permit udp any host 2.2.2.77 eq 62307
access-list outside permit tcp any host 2.2.2.77 eq 62307
access-list nonat permit ip 10.0.0.0 255.0.0.0 207.222.138.128 255.255.255.192
access-list nonat permit ip 10.20.30.0 255.255.255.0 192.168.11.0 255.255.255.0
access-list inside deny tcp any any eq 445 log
access-list inside permit ip any any
access-list inside deny tcp any eq 1639 any eq 1639
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 2.2.2.77 255.255.255.248
ip address inside 10.20.30.2 255.0.0.0
ip audit info action alarm
ip audit attack action alarm
pdm location 10.20.30.5 255.255.255.255 inside
pdm location 10.20.30.7 255.255.255.255 inside
pdm location 207.222.138.128 255.255.255.192 outside
pdm location 10.20.30.229 255.255.255.255 inside
pdm location 167.1.162.0 255.255.255.0 outside
pdm location 10.20.30.165 255.255.255.255 inside
pdm location 192.168.11.0 255.255.255.0 inside
pdm location 192.168.11.0 255.255.255.0 outside
pdm location 10.20.30.0 255.255.255.0 inside
pdm location 192.168.1.0 255.255.255.0 inside
pdm location 206.126.161.244 255.255.255.255 inside
pdm location 206.126.161.244 255.255.255.255 outside
pdm location 203.167.75.0 255.255.255.0 outside
pdm location florence 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 2.2.2.75 https 10.20.30.169 https netmask 255.255.255.255 0 0
static (inside,outside) tcp 2.2.2.75 www 10.20.30.169 www netmask 255.255.255.255 0 0
static (inside,outside) 2.2.2.78 10.20.30.5 netmask 255.255.255.255 0 0
static (inside,outside) 2.2.2.76 10.20.30.165 netmask 255.255.255.255 0 0
static (inside,outside) 2.2.2.74 florence netmask 255.255.255.255 0 0
access-group outside in interface outside
access-group inside in interface inside
route outside 0.0.0.0 0.0.0.0 2.2.2.73 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.0.0 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
telnet 10.0.0.0 255.0.0.0 inside
telnet timeout 5
ssh timeout 5
management-access inside
console timeout 0
username admin password xxx
terminal width 80

I've removed a few items that don't relate (isakemp stuff, etc), and changed all outside IP addresses to 2.2.2.x

thanks for any help/suggestions.  
ASKER CERTIFIED SOLUTION
uktechnical

Our community of experts have been thoroughly vetted for their expertise and industry experience.

Join our community to see this answer!
Unlock 1 Answer and 3 Comments.
Start Free Trial
Learn from the best

Network and collaborate with thousands of CTOs, CISOs, and IT Pros rooting for you and your success.

Andrew Hancock - VMware vExpert
See if this solution works for you by signing up for a 7 day free trial.
Unlock 1 Answer and 3 Comments.
Try for 7 days

”The time we save is the biggest benefit of E-E to our team. What could take multiple guys 2 hours or more each to find is accessed in around 15 minutes on Experts Exchange.

-Mike Kapnisakis, Warner Bros