asked on

Setup Exchange 2007 Unified Messaging using AudioCodes MP-114

I am very interested in getting the UM working with Exchange 2007 and OCS 2007. I have a lot of experience in working with MS products but my telecoms skills are practically zero apart from what I have been reading over the last two weeking. FXO and FXS is confusing the hell out of me L. Anyway I would most appreciate if you could help me in anyway. I would firstly like to get Exchange UM working.

On site we have an Exchange 2007 server, Meridian 1 - Option 11 and Audiocodes MP-114. The MP-114 has just 4 x FXS ports , no FXO ports. Are these all the ingredients that I need? Or should we have bought the MP-114 with FXO ports also? Looking on the Internet it looks like the Audiocodes box might not be compatible with our switch?

On the pbx we have four available analog lines, are these suppose to be connected to the FXS port or should they be connected to FXO port.

Patrick Yore

ASKER CERTIFIED SOLUTION

jafar54

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

pyore

ASKER

Can you let me know how you get on with your ocs config thanks. The mp114 that arrived to us was the wrong one it only had fxs ports, I did get it to work by just plugging an analog line into the fxs port. I have now ordered the fxo version so that u can use the analog line from our pbx
thanks for help

jafar54

cool .....will do.

in the meantime, have you checked out the following url:
http://www.audiocodes.com/Content.aspx?voip=2823

we are using some of the resources on this page to develop the unified comms solution.

http://www.audiocodes.com/Content.aspx?voip=2757 is also a good ref to look at.

jafar54