Learn how to a build a cloud-first strategyRegister Now

x
  • Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 405
  • Last Modified:

hi, the machine is powering on but nothing on screen and no beep code. Cr9f1 light flashing on motherboard.

Cr9f1 light flashing on motherboard, no beep code and nothing on screen when you turn on workstation.
0
aclfc5
Asked:
aclfc5
1 Solution
 
Rick HobbsRETIREDCommented:
In most cases like this it its the motherboard or the cpu.  If you have another CPU try swapping it.
Step by step to verify:
1. Remove the connections to your drives (make a note of where each one goes), remove any PCI cards except the video card and try booting.
2. If you still can't boot, remove the videocard and try again... make a note of any beep signals you may get.
3. If you still can't boot remove the memory cards and try again... make a note of any beep signals you may get.
4. If you get any beep signals after doing any of these then report it here without going on to the next step.
5.If you still can't boot, then it's down to the motherboard or cpu.
Let us know the results.
0

Featured Post

Upgrade your Question Security!

Add Premium security features to your question to ensure its privacy or anonymity. Learn more about your ability to control Question Security today.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now