• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 8650
  • Last Modified:

VPN Client 4.8 - Error:DNE

Running an Windows XP SP2 machine attempting to install VPN Client 4.8. Didn't realize that it was already installed. After running the install again I am getting the folloing error message. " Install DNE - Error: DNE installation requires a reboot first. Please run this install again after restarting the computer." I have restarted the computer and tried to restart the installation several times coming up with the same error.

What am I missing?
  • 2
1 Solution
I have had a few similar problems with Cisco VPN.  I assume you're talking about the Client.  The only way to get around it is to manually uninstall it, reboot, and the try install again.  
I only have uninstall instructions for 3.5 but they have worked for me.  A few of the reg keys may be slightly different but you can still remove enough to give it a fresh install.  
dowhatyoudo22Author Commented:
Tried the steps indicated in the link. But still getting the same probelm error message.
I managed to find this.  Should be worth a go.  It is from Deterministic Networks.

1) Uninstall the Cisco client.
2) Reboot
3) Go to our website at www.deterministicnetworks.com and download the Traffic Governor demo.  
4) Install and reboot - you don't have to run the application.  This will upgrade DNE to the latest version.
5) Reinstall the Cisco VPN client.  It will just install the Cisco plugin - it won't install an older version of DNE.

That email is from DNE.com support..

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now