brownmattc
asked on
NIC Teaming Config - 2003 R2
Here is an easy one:
Where can I find the Microsoft Step-by-step to create a teaming config for my NIC's on Windows Server 2003 R2?
Thanks,
Matt
Where can I find the Microsoft Step-by-step to create a teaming config for my NIC's on Windows Server 2003 R2?
Thanks,
Matt
sorry it wont lol
Go to the network card vendor down load their teaming software.
Example
Intel, download: Intel PROSet
http://support.intel.com/support/network/sb/cs-006120.htm
Example
Intel, download: Intel PROSet
http://support.intel.com/support/network/sb/cs-006120.htm
ASKER
Ya I just realized the question was mis-stated.
I have Dell 1950's and Dell 2900's
I have Dell 1950's and Dell 2900's
ASKER
They have Broadcom adapters
ASKER CERTIFIED SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
SOLUTION
membership
Create a free account to see this answer
Signing up is free and takes 30 seconds. No credit card required.
ASKER
Had to install the broadcom suite:
http://support.dell.com/support/downloads/download.aspx?c=us&cs=04&l=en&s=bsd&releaseid=R164432&SystemID=PWE_1950&servicetag=6YQDRD1&os=WNET&osl=en&deviceid=8641&devlib=0&typecnt=0&vercnt=7&catid=-1&impid=-1&formatcnt=2&libid=5&fileid=220858
Here is the documentation for the Suite:
http://support.dell.com/support/edocs/network/r35278/UG/en/BACS.htm
Here is a Dell doc that explains everything about teaming in deep detail:
http://support.dell.com/support/edocs/network/r35278/broadcom%20nic%20teaming_1.1_final.doc
http://support.dell.com/support/downloads/download.aspx?c=us&cs=04&l=en&s=bsd&releaseid=R164432&SystemID=PWE_1950&servicetag=6YQDRD1&os=WNET&osl=en&deviceid=8641&devlib=0&typecnt=0&vercnt=7&catid=-1&impid=-1&formatcnt=2&libid=5&fileid=220858
Here is the documentation for the Suite:
http://support.dell.com/support/edocs/network/r35278/UG/en/BACS.htm
Here is a Dell doc that explains everything about teaming in deep detail:
http://support.dell.com/support/edocs/network/r35278/broadcom%20nic%20teaming_1.1_final.doc
this should help you