• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 322
  • Last Modified:

Cisco 1841HW alternative/configuration suggestions requested

I am having a dedicated point-to-point T1 run between our facility and our colocation. I was thinking Cisco 1841s on each side. Suggestions?

What do you suggest as far as Installed RAM and Flash RAM, interface cards, etc? We are Ethernet on both sides (LAN) and the T1 circuit on both sides will be terminated with RJ45s.
0
sup_dog
Asked:
sup_dog
2 Solutions
 
bfasonCommented:
The 1841 should be sufficient for most applications. If you don't have an external CSU/dsu then you can get the WIC-1DSU-T1-V2 to terminate your T1's. Again base Flash/ram on the 1841 is normally sufficient for most applications.

Hope this helps
B

0
 
lrmooreCommented:
You can purchase a 1841 T1 bundle that comes with the DSU module. The default base DRAm/Flash on the 1800 series will be plenty.
Part # CISCO1841-T1
 Cisco 1841 T1 bundle with IOS IP BASE, WIC-1DSU-T1-V2, 32 MB Flash/
128 MB DRAM
 
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now