• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 277
  • Last Modified:

can not use MS VPN, local and remote network are same setting

Hi,

company network: 10.10.10.0/24
VPN: windows 2000 server, with IP block 10.10.10.150- 10.10.10.159

I am using vpn in a hotel with server ip 10.10.10.150, client ip 10.10.10.153.
the VPN was working fine but not in this hotel, I found out that the hotel network setting is also 10.10.10.0/24.

so when i tried to ping a server, it will take the ip as local not in the remote network.

does anyone have idea about this issue?
I tried use route command in XP, but no luck...

thanks a lot!

Robin
0
robinyanwang
Asked:
robinyanwang
  • 2
  • 2
1 Solution
 
mhequipitCommented:
I used to install High Speed internet in hotels and have seen this alot.  If your client can be set for nat transparency mode use that and it should solve it.  If not you're out of luck at that hotel.  I would suggest to your company to switch to a SSL based VPN and this will cure the issue in the future.
0
 
robinyanwangAuthor Commented:

C:\Documents and Settings\admin>route add 10.10.10.0 mask 255.255.255.0 10.10.10.153 metric 1
The route addition failed: The parameter is incorrect.


i got the parameter error, could someone tell me what is the error?
0
 
robinyanwangAuthor Commented:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0       10.10.10.1    10.10.10.100       25////////////////
       10.10.10.0    255.255.255.0     10.10.10.100    10.10.10.100       25////////////////
     10.10.10.100  255.255.255.255        127.0.0.1       127.0.0.1       25////////////////
   10.255.255.255  255.255.255.255     10.10.10.100    10.10.10.100       25////////////////
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1 ////////////////
        224.0.0.0        240.0.0.0     10.10.10.100    10.10.10.100       25////////////////
  255.255.255.255  255.255.255.255     10.10.10.100    10.10.10.100       1 ////////////////
Default Gateway:        10.10.10.1

above is the route print, i tried to delete route 10.10.10.0, using 'route delete 10.10.10.0', and i got the route was not found.

i would like to replace 10.10.10.100 as 10.10.10.153, which is the vpn address...
0
 
mhequipitCommented:
I don't think it is going to work.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

  • 2
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now