[Last Call] Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

Remove Cisco Catalyst 3750 stack completely

Posted on 2007-10-18
1
Medium Priority
?
6,313 Views
Last Modified: 2008-01-09
I have 2 Cisco Catalyst 3750 PoE-48 which I attempted to create a stack with.  That failed so now I'm trying to get everything back to defaults but they are still showing up with previous stack information.  I've since updated the Flash to c3750-ipbasek9-mz.122-40.SE versions on both of them.  I've removed the stack cables and now they are basically stand-alone units.

How do I remove the stack inforation and get these to factory default settings?

Here's what shows when I issue a Show Running Config:


Current configuration : 2224 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
enable secret 5 xxxxxxxxxxxxxxxxxxxxx
enable password xxxxxxxxxxxxxxxxxxxx
!
no aaa new-model
switch 1 provision ws-c3750-48p
system mtu routing 1500
ip subnet-zero
!
!
<REMOVED TO SHRINK>
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
interface FastEthernet1/0/1
!
interface FastEthernet1/0/2
!
interface FastEthernet1/0/3
!
interface FastEthernet1/0/4

<REMOVED TO SHRINK>
interface Vlan1
 no ip address
 shutdown
!
ip classless
ip http server
!
!
control-plane
!
!
line con 0
line vty 0 4
 password xxxx
 login
line vty 5 15
 password xxxx
 login
!
end

Switch#

Any Ideas?
0
Comment
Question by:trippleO7
1 Comment
 
LVL 11

Accepted Solution

by:
grsteed earned 2000 total points
ID: 20106759
I don't see any stack info, only this line "switch 1 provision ws-c3750-48p" which is fine for a single switch.   If you do a "show switch" or "show version" does it show the second switch?  If you do a "sh ip int b" do you see ports past f1/0/48" like f2/0/x?  

If not, then it's not configured as a stack anymore.  I have seen the second switch show up after it's been removed, but it goes away with the "no switch..." command.

I manage many switch stacks with the 3750 and haven't had any problems getting them to play.

Cheers,
Gary
0

Featured Post

Upgrade your Question Security!

Add Premium security features to your question to ensure its privacy or anonymity. Learn more about your ability to control Question Security today.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The worst thing when starting a new job is when the previous Network Administrator left behind no documentation. How do you get into the devices? If you've been in this situation or just accidently mistyped your password, this article will hopefully…
I see many questions here on Experts Exchange regarding switch port configurations and trunks. This article is meant for beginners in the subject to help to get basic knowledge about Virtual Local Area Network (VLAN (http://en.wikipedia.org/wiki/Vir…
Exchange organizations may use the Journaling Agent of the Transport Service to archive messages going through Exchange. However, if the Transport Service is integrated with some email content management application (such as an anti-spam), the admin…
When cloud platforms entered the scene, users and companies jumped on board to take advantage of the many benefits, like the ability to work and connect with company information from various locations. What many didn't foresee was the increased risk…
Suggested Courses

834 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question