• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1581
  • Last Modified:

File \Win32\a320raid.sys caused an unexpected error (528) at line 2335 in d:\srvrtm\base\boot\setup\oemdisk.c.

I want to install Server 2003 Standard 32 Bit on a Intel Server Board SE7210TP1-E with 2 SATA drives, Mirrored using the onboard RAID controller.

RAID Array is newly created after both drives were formatted.

Usinf F6 when setup screen starts I select the additional mass storage driver for "Adaptec Host Raid U320 Ver 1.02 for Windows 2000/XP/2003.

The error is displayed after that - "File \Win32\a320raid.sys caused an unexpected error (528) at line 2335 in d:\srvrtm\base\boot\setup\oemdisk.c."

Regards,

bennie
0
about-it
Asked:
about-it
  • 2
1 Solution
 
Netman66Commented:
Try installing without using F6.  Some onboard SATA controllers are presented to Windows as normal controllers.

After the OS is installed, then you can attempt to upgrade the drivers.

Advise.
0
 
about-itAuthor Commented:
Netman66,

I tried it, but does not work - "Setup did not find any hard disk drives..."

bennie
0
 
about-itAuthor Commented:
I used 4 different stiffy disks and eventually got the driver loaded.

It therefore seems to have been faulty stiffy's causing the error.

bennie
0
 
Vee_ModCommented:
Closed, 500 points refunded.
Vee_Mod
Community Support Moderator
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now