• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1060
  • Last Modified:

PIX error: ERROR: access-list <inside_outbound_nat0_acl> does not exist

I'm tring to recreate this PIX command:

access_list nat0 permit 192.168.17.0 255.255.255.0

But it keeps saying this when I cut a paste it:

cda-pix(config)# nat (inside) 0 access-list inside_outbound_nat0_acl      
ERROR: access-list <inside_outbound_nat0_acl> does not exist
cda-pix(config)#

what commands have to be enter in order to get this line to appear in the sh ver on my pix 506 e

Thanks
0
rclose1977
Asked:
rclose1977
1 Solution
 
ametzlerCommented:
access-list [list name] permit ip 192.168.17.0 255.255.255.0
or
access-list [list name] permit any 192.168.17.0 255.255.255.0
then
nat (inside) 0 access-list [list name]

That should work.
0

Featured Post

How to change the world, one degree at a time.

By embracing technology, we can solve even the biggest problems—including the gender gap.  By earning a degree from WGU, you have an opportunity to gain the knowledge, credentials, and experience it takes to thrive in today’s high-growth IT industry.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now