Connecting 2 different accessable servers to 1 DSL line

Posted on 2007-10-21
Medium Priority
Last Modified: 2010-07-27
Hi, I need to setup a Linux webserver that should be accessable both from my internal SBS-network and from internet.
Here is what I got
Incoming device Router
-DSL Dynamic line with dyndns.Moden/Router with 4 ports.
--One port is the SBS-server.
--One port for a guest-net outside of the server
SBS-server and net
-External NIC 192-168.0.2
-Internal net and the rest of the SBS network.
Now connecting the webserver
If I connect it to the router, what ip range should it have the or and what will happend when I call fpr that ip nr from inside of the SBS-net. Would I reach it?
As I said I have a dynDns. How will I call the webserver from outside. Does it have anything to do with ports?
The easiest way would of course be to get 2 DSL. lines but that is not possible.
Question by:perbackman

Accepted Solution

jharoraven earned 750 total points
ID: 20125074
just to understand ur scenario:
                     | (DSL Line)
                 |                 |
                 |               (Guest PC) 192.168.0.X
  ( NIC 1)
      (SBS Server)  
  ( NIC 2)
   (Your internal network)

Is this correct?


Author Comment

ID: 20125678
So my question is. Where and how can I connect the webserver to ba able to connect to it both from outside and inside.
very Much Thanks

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…
Suggested Courses

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question