Link to home
Start Free TrialLog in
Avatar of James
James

asked on

% Error in authentication. ??

Ok - what the hell am I doing?

Setup two 3750G switches in a stack with a couple vlans.  I can log in via the console port just fine & enter en ok.  But... if I telnet into the switch, I can authenticate as a user with lev 15 permissions, but if I try to enter en mode - get the following error:

BEL-3750G-ServerRoom>en
% Error in authentication.

Same user via console or telnet.

aaa new-model
aaa authentication login default local
aaa session-id common

Thanks for you help!
Avatar of nodisco
nodisco
Flag of New Zealand image

Can you post the section of your config relevant to your telnet loging please
e.g.
line vty 0 4
****************


I suspect you have an issue here

cheers
Avatar of James
James

ASKER

control-plane
!
!
line con 0
line vty 5 15
!

Thanks
ASKER CERTIFIED SOLUTION
Avatar of nodisco
nodisco
Flag of New Zealand image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of James

ASKER

ok - somewhere along the line I locked myself out via console.  Didn't save the config, so I will need to reboot off hours & get back to you.

Thanks
Avatar of James

ASKER

Got it working.
Thanks for the help.