Solved

phyiscal interface for MPLS network options

Posted on 2007-11-16
1
693 Views
Last Modified: 2008-02-01
I am wondering if you need a T1 (dsu/csu)card to set up MPLS network.  can you jack into MPLS with Ethernet port?
0
Comment
Question by:tonymopar440
1 Comment
 
LVL 79

Accepted Solution

by:
lrmoore earned 500 total points
ID: 20299278
Depends on what the Telco is delivering. Metro Ethernet uses Ethernet. All other solutions terminate on a T1 which requires the WIC CSU/DSU module.
0

Featured Post

Announcing the Most Valuable Experts of 2016

MVEs are more concerned with the satisfaction of those they help than with the considerable points they can earn. They are the types of people you feel privileged to call colleagues. Join us in honoring this amazing group of Experts.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Converting TV to Network (Muli-User) Web front. 8 74
Is WiFi half-duplex or Full -duplex 4 60
Router assigned IP addresses 18 98
Upgrading from Sonicwall Tz210 6 11
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Before I go to far, let's explain HA (High Availability) and why you should consider it.  High availability is the mechanism used to provide redundancy to any service at the same site and appears as a single service to the users of that service.  As…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question