Solved

Exchange 2003 new domain cannot send emails

Posted on 2007-11-16
7
264 Views
Last Modified: 2010-04-12
we recently created a new domain with a domain controller and Exchange 2003 on separate machines, within a forest.  Users within this domain are unable to send/receive email and below is the error message that appears in Event Viewer:

LDAP returned the error [35] Unwilling to perform when importing the transaction
dn: <SID = 0102000000000005200000002A020000>
changetype: Modify
member:add:<GUID =A11D386A-5252-420A-A872-34C43932FECC>

DC= PRQ01 ,DC=SAKJ,DC=COM

Within System Manager when I try to connect to other Exchange Servers within the forest i.e. When I try to connect to the Master, I get the following: The Semaphore timeout period has expired.

When I try to connect to other Exchange Servers which are not the master I just receive: The remote server did not respond to a connection attempt.  All other domains are connected via Leased Lines and this domain is connected via a VPN Tunnell.  All DNS looks ok and I can ping everything

PLEASE HELP!!!!
0
Comment
Question by:minniejp
  • 3
  • 2
  • 2
7 Comments
 
LVL 13

Accepted Solution

by:
cshepfam earned 500 total points
ID: 20301342
I believe you're going to have to set up a routing group connector between your exchange servers so they can relay back and forth and know how to send and receive email.


http://support.microsoft.com/kb/822929
0
 

Author Comment

by:minniejp
ID: 20305674
Thanks for your reply, I have already setup a routing group connector.  I just double checked everything and I am sooooo puzzeled as to what is going on!!!.
0
 
LVL 13

Expert Comment

by:cshepfam
ID: 20312049
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 

Author Comment

by:minniejp
ID: 20335837
Thanks again for your reply

1) I'm not using Lotus so not sure how the first link could help (sorry if I have mis read the link)
2) I'm using the lastest Service pack for Exchange 2003
3) I will check the router to see if it is disconnecting the LDAP sessions.

Thanks
0
 

Expert Comment

by:rket
ID: 21109357
You should check under the system manger in exchange>Administrative Groups>Servers>(servername)
open the properties and check the directory access tab. Make sure exchange is using the proper Domain Controllers.
Semaphore time outs can also be an indication that there are network issues. If you have a sniifer you might try to see what is going on. For grins and giggles, try raisisng the MTU for your NICS.
0
 

Author Comment

by:minniejp
ID: 21276251
Sorry for the delay, could you recommend a sniffer package?
0
 

Expert Comment

by:rket
ID: 21298781
omnipeek from wildpackets is a decent software sniffer.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Scam emails are a huge burden for many businesses. Spotting one is not always easy. Follow our tips to identify if an email you receive is a scam.
This article explains how to install and use the NTBackup utility that comes with Windows Server.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question