Solved

Samsung Monitor Remote

Posted on 2007-11-18
6
2,675 Views
Last Modified: 2016-08-26
I have a Samsung 225MS monitor which is used as a second TV as well as monitor but it doesn't come with a remote. It has a multitude of connections but not infrared apparently, is there anything else which I can use so that it can be used with a remote whilst watching TV.
0
Comment
Question by:Marina2006
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
6 Comments
 
LVL 69

Expert Comment

by:Callandor
ID: 20310284
What you want to do is attach an infrared receiver to the PC or whatever is driving the display, since the monitor itself doesn't have a tuner.  The USB-UIRT is a good universal infrared receiver for PCs: http://www.usbuirt.com/.  If you're using a set top box DVD player or VCR, it should already have a remote.
0
 

Author Comment

by:Marina2006
ID: 20310749
I have looked at this and it appears that it can act as a receiver and transmitter to other infra red ready equipment. The problem is that the monitor does not have anything which I can connect an infrared cable to.
Can I do anything with the following Input Connectors: 15pin D-sub, DVI-D, HDMI CVBS, S-video, Component

http://www.samsung.com/au/products/monitors/tft/tvmonitor/225ms.asp

0
 
LVL 69

Expert Comment

by:Callandor
ID: 20316882
No, those are strictly video transport connectors.  As I said, the tuner isn't in the monitor, so it can't act like a regular TV.  What do you have it connected to in order to watch TV?  That is what you need to connect an IR receiver to.
0
Is your NGFW recommended by NSS Labs?

Ours is! NSS Labs Next Generation Firewall Test gives the WatchGuard Firebox M4600 a "Recommended" rating! Curious where your NGFW landed on the  Security Value Map? See the map and download the full report today!

 

Author Comment

by:Marina2006
ID: 20317216
I can use with either seperately
1. Cable TV PVR (personal video recorder with HDD)
2. PVR (personal video recorder with HDD) which also has a TV Tuner.
Both have remote controls but I cannot access the monitor.

I mean for things as monitor source, so that I can switch between say cable with component, PVR with HDMI or computer on VGA, change the monitors resolution, change volume it has inbuilt speakers or even just turning the monitors power off at this stage.
0
 
LVL 69

Accepted Solution

by:
Callandor earned 500 total points
ID: 20317462
It's not a true TV, which allows you to control which input source is selected.  You will have to control it using the PVRs by turning on or off the source.  It seems to be designed for a PC, which would be sending a signal to the 15-pin D-sub, DVI-D, or HDMI CVBS ports, and since those are high-quality ports, you would not change the connection.  You also would choose the material and control the volume through the PC.
0
 

Expert Comment

by:Angela Ruth
ID: 41772000
I have. samg sung sur 40 monitor. can i use a remote. On it if so what kind. of remote
0

Featured Post

Online Training Solution

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action. Forget about retraining and skyrocket knowledge retention rates.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Moving your enterprise fax infrastructure from in-house fax machines and servers to the cloud makes sense — from both an efficiency and productivity standpoint. But does migrating to a cloud fax solution mean you will no longer be able to send or re…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
Add bar graphs to Access queries using Unicode block characters. Graphs appear on every record in the color you want. Give life to numbers. Hopes this gives you ideas on visualizing your data in new ways ~ Create a calculated field in a query: …
Do you want to know how to make a graph with Microsoft Access? First, create a query with the data for the chart. Then make a blank form and add a chart control. This video also shows how to change what data is displayed on the graph as well as form…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question