?
Solved

Restore RAID 0 Image to RAID 1 Array

Posted on 2007-11-19
2
Medium Priority
?
810 Views
Last Modified: 2016-10-27
I had a Raid 0 array on my desktop and lost one of the drives. I replaced them with a new pair and want to creae a Raid 1 volume.  Hopefully to avoid this mess I am in now in the future.

Can I take the Acronis Raid 0 image and restore it to a Raid 1 configuration?

Thanks,
Jim
0
Comment
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 18

Accepted Solution

by:
simsjrg earned 500 total points
ID: 20314392
Yes. I have used Acronis for many things in the past including what you are trying to do. I have used it to migrate physical servers to virtual and vice versa, Re-imaged a server that was running RAID5 to a new server running RAID10. As long as the physical hardware remains the same for you (since your running the home edition) that fact that the volume is now mirrored rather than striped makes no difference.
0
 

Author Closing Comment

by:jdanielatstarstreamnet
ID: 31409935
Thanks for your encouraging response.  I took awhile because I had to headache a BartPE rescue disk with my drivers.  It did work successfully.
Thanks
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The recent Petya-like ransomware attack served a big blow to hundreds of banks, corporations and government offices The Acronis blog takes a closer look at this damaging worm to see what’s behind it – and offers up tips on how you can safeguard your…
What's worse than having your data encrypted by ransomware? Getting attacked by a so-called "wiper," which simply destroys the data and offers you no hope of ever seeing it again.
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…
Suggested Courses

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question