Solved

Your computer has recovered from a serious error with BCCode4

Posted on 2007-11-19
9
767 Views
Last Modified: 2016-08-29
I'm working on a PC thats freezing intermittently. It can sometimes go for hours without any issues, then all of a sudden just lockup and requires a restarting. Upon loading windows again I get a serious error recovery message with the following; It is rerally getting annoying as each morning I come to work I have to boot up  and sometimes go to safe mode and scan disk to get the pc to boot

error= CCode : f4     BCP1 : 00000003     BCP2 : 892D3428     BCP3 : 892D359C    
BCP4 : 805D11F8     OSVer : 5_1_2600     SP : 2_0     Product : 256_1

I have zipped up the mini dump files if anybopdy knows how to read these :)

IN admin tools> System>event viewer I see system erro r= error code 000000f4, parameter1 00000003, parameter2 892d3428, parameter3 892d359c, parameter4 805d11f8.

There are NO yellow check marks in Device Manager.

Any help would be seriously appreciated as this is the primary PC at work


0
Comment
Question by:webguy62
  • 5
  • 4
9 Comments
 
LVL 32

Expert Comment

by:and235100
ID: 20313222
0
 
LVL 32

Expert Comment

by:and235100
ID: 20313243
You can upload the minidump files to http://www.ee-stuff.com/
Just login - and upload the mindumps in zip files in conjunction with this question - and someone can take a look for you.
0
 

Author Comment

by:webguy62
ID: 20313537
I have uploaded file tbut the url  that I uploaded the files to http://www.ee-stuff.com/Expert/Upload/upload.php  did not give a url to post  for downloading as it says it will .

I have uploaded the dumps to http://www.re-data.com/ee/dumps.zip it is only 85 KB
0
 

Author Comment

by:webguy62
ID: 20313882
0
What Is Threat Intelligence?

Threat intelligence is often discussed, but rarely understood. Starting with a precise definition, along with clear business goals, is essential.

 
LVL 32

Accepted Solution

by:
and235100 earned 500 total points
ID: 20315252
Check for faulty ram - as with the majority of blue screens.
http://www.memtest.org/
Create a bootable CD - then run at least 2-3 full passes - anything shown up in red is bad memory blocks.
You can verify the result with the oca memory diagnostic:
http://oca.microsoft.com/en/windiag.asp
0
 

Author Comment

by:webguy62
ID: 20315400
thanks  this sis what I have been thinking in looking at the bug check code 4. It is either RAM or the MB. Will try this diag disc  tonight.. thank for the tip
0
 
LVL 32

Expert Comment

by:and235100
ID: 20315844
For general tests - look at:
ubcd - http://www.ultimatebootcd.com/
ubcd4win - http://www.ubcd4win.com/downloads.htm

You can download, burn and boot from these iso's - and do a range of motherboard, hard drive and memory tests.
0
 

Author Closing Comment

by:webguy62
ID: 31409952
I have used this solution and found 2 of 4 sticks of ram bad after booting with the memtest dvd.  Replaced and all is now well...thnx
0
 
LVL 32

Expert Comment

by:and235100
ID: 20322601
I hope you found the route cause of the problem. Thank you.
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

Moving your enterprise fax infrastructure from in-house fax machines and servers to the cloud makes sense — from both an efficiency and productivity standpoint. But does migrating to a cloud fax solution mean you will no longer be able to send or re…
In the modern office, employees tend to move around the workplace a lot more freely. Conferences, collaborative groups, flexible seating and working from home require a new level of mobility. Technology has not only changed the behavior and the expe…
Access reports are powerful and flexible. Learn how to create a query and then a grouped report using the wizard. Modify the report design after the wizard is done to make it look better. There will be another video to explain how to put the final p…
This tutorial demonstrates a quick way of adding group price to multiple Magento products.

706 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now