Solved

Moving DHCP from a smoothwall to A windows 2003 server (fileserver)

Posted on 2007-11-19
2
308 Views
Last Modified: 2008-02-01
Hi All,

we are currently running DHCP on a smoothwall firewall and would like to move the DHCP service to a new windows server.
I would like to do this without interruption;
what would be the procedure?
if possible "step-by-step" instructions.

I would really appreciate all the help that you can provide.

thanks,
0
Comment
Question by:winperez
2 Comments
 
LVL 15

Accepted Solution

by:
JimboEfx earned 500 total points
ID: 20315796
A guide with screenshots.
http://www.windowsnetworking.com/articles_tutorials/DHCP_Server_Windows_2003.html

Backup smoothwall config. Just in case.
Install DHCP on server but do not authorise.
Make a note of smoothwall IP (I'm guessing this is your default gateway)
Make a note of your subnet mast (255.255.255.0 is likely, though check)
Make a note of any reference to a start and end range on the smooth wall.
Make a note of any ip reservations and their mac addresses.

Configure using wizard and the above information.
Authorise and start dhcp
Stop smoothwall dhcp.

Clients will get their ips from the new server gradually or when they next reboot.
0
 

Author Comment

by:winperez
ID: 20353657
works perfect
0

Featured Post

Windows Server 2016: All you need to know

Learn about Hyper-V features that increase functionality and usability of Microsoft Windows Server 2016. Also, throughout this eBook, you’ll find some basic PowerShell examples that will help you leverage the scripts in your environments!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Restoring deleted objects in Active Directory has been a standard feature in Active Directory for many years, yet some admins may not know what is available.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

948 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now